Installation Guide

710283-100 Rev. E 11/16
5
2
FITTING FRAME ASSEMBLY INTO OPENING
2 PEOPLE REQUIRED
Screw M4x25
Screw M4x12
(6) Wall Post
(15) Door Post
4A
4B
VIEW FROM INSIDE
(10) Center Guide
VIEW FROM INSIDE
Slide Wall Posts (6) on each end. The Wall Posts fit inside Door Posts of the frame.
Attach Glass Center Guide (10) to Bottom Horizontal Rail and Center Post (11) using screw as shown in 5A
& 5B. Attach Center Post to Top Horizontal Rail as shown in 5C.
4A - 4B
5A - 5C
5C
5B
5A
1
2
3
1
2 3
A
57-1/4" x 58-1/16"
(1455 x 1475mm)
ANCHOR INSTALL
Mark holes
DO NOT install screws
Use 1/4" drill bit
for anchor holes
DRILL FOR ANCHOR
IF NEEDED
INSTALL ANCHOR
IF NEEDED
Place completed frame onto the tub edge located at the edge of
the at surface of the deck. Push wall posts against wall and position
the posts with a level and mark the mounting holes on the wall.
Remove the frame.
Use the anchors if NOT securing to studs.
Remove frame and proceed to STEP 3.
A
FRAME ASSEMBLY (CONTINUED)
1