Installation Guide

710284-100 Rev. G 11/16
6
VIEW FROM INSIDE
Screw M4x10 Screw M4x10
CapCap
FIXING ASSEMBLY TO WALL POSTS
Ensure Door Assembly is centered in opening. Push down to top of shower base before anchoring screws to Wall Posts.
1A & 2A
1B & 2B
1C & 2C
Drill Pilot Holes
Secure door posts to wall posts with screws
Snap Cap in place
1A 2A
1B 2B
1C 2C
Ø1/8" Bit
[Ø3.2mm]
1
2
INSTALLING FRAME
2 PEOPLE REQUIRED
1. Secure assembly to wall using previously drilled holes.
2. Install Screw Cover Caps.
Screw M4x35 (2)
VIEW FROM INSIDE
1
2
3
4
NOTE: If Wall Posts are provided with four (4) attachment
holes, kits will include the additional hardware.