Installation Guide

OUTSIDE
PANEL
INSIDE
PANEL
TOWEL BAR
SCREW
PLASTIC
GROMMET
WASHER
TOWEL BAR
710006-100
6
TOWEL BAR INSTALLATION GUIDE
PACER
The towel bars are attached on the inside of the
inside panel and the outside of the outside panel
by using two 1" flat head thread forming tapping
screws. See diagram
TOWEL BAR
BRACKET
TOWEL BAR
EXTRUSION
PRESTIGE
To attach to the panel:
1. Push left side towel bar brackets into left side of
towel bar extrusions and right towel bar brackets
into right side of towel bar extrusions. Then attach
towel bars on the inside of the inside panel and on
the outside of the outside panel, using two 3/4" flat
head thread forming tapping screw. See diagram.
ACTUAL SIZE
ACTUAL SIZE
EURO
To attach to the glass:
Place one washer on the screw then place the
grommet over the washer. Slide the screw into
the glass. On the opposite side of the glass place
the other washer and the towel bar. Then tighten
the screw into the towel bar by using the allen wrench
provided. Do not overtighten. See diagram.