Installation Guide
QCI5297 REV. 0.1 Page 3 Cered 10/1/17
Maintenance:
Two primary materials are used to manufacture your new Basco shower enclosure: tempered
glass and anodized aluminum. To assure a long lasting finish on the enclosure, wipe it down with
a towel after each use.
For occasional, more concentrated cleaning efforts, we find that Lysol® Non-Abrasive Bathroom
Cleaner works extremely well. Be sure that any over spray falling on the aluminum frame is
rinsed thoroughly and dried. Many over-the-counter cleaners, if applied to the aluminum and left
on, will harm the metal finish and cause permanent damage even though their directions indicate
safe use on shower doors. Never use a scouring agent to clean the aluminum.
For units with AquaglideXP Basco recommends the use of Maintain Spray on the glass. Please
contact customer service for details.
This unit is completely reversible and may be installed hinge-right or hinge-left. Refer to the illustra-
tion to determine the best position of the hinge for your installation. For maximum water proofing,
the hinge jamb should always be opposite the shower head.
Orientation Note:
CAUTION: For safety purposes, the door MUST ALWAYS open out-
ward.