Installation Guide
QCI5297 REV. 0.1 Page 12 Cered 10/1/17
After the door is leveled, push or pull the door assembly as required to set the distance be-
tween the Glass [1] and the wall where the fixed panel will be.
Check the top and bottom of the door for the gap.
Set the gap at between Panel Width + 3/8” to Panel Width + 1 1/16”
If the panel is 12” wide, the distance between the glass and the wall should be 12 3/8” to 13 1/16”
The u-channel at the wall allows for out-of-plumb and width adjustment. The distance from wall to
door may not be consistent the entire unit height.
13
3/8” to 1 1/16” +
PANEL WIDTH
TOP AND BOTTOM
Fixed Panel
Wall
Door Edge
3/8” to 1 1/16” +
PANEL WIDTH
TOP AND BOTTOM