Installation Guide

MIN

MAX

VIEW FROM

INSIDE

8d 8d

[10]

[6]

[7]

ADJUSTING EXTERIOR AND INTERIOR DOOR PANELS

• In this step, you’ll need following parts: [6] x2, [10] x2

• In this step, you’ll need the following tool: D

8a. Once all assembly is completed, it may be necessary to adjust both the Exterior [21] and Interior [22]

Door Panels to ensure they are both level and when closed, t up against the wall to seal properly.

(ref. Illustration)

8b. Close both Exterior and Interior Door Panels against the walls and observe if there are any gaps or open

areas where water can come out. (ref. Illustration) If there are gaps, it will be necessary to adjust the

Exterior or Interior Wheels for a proper t at that location.

8c. Depending upon which door or doors need to be adjusted, loosen the metal nut on either Exterior or Inte-

rior Wheel using the supplied Wrench [7]. Using an adjustable Wrench, rotate the plastic nut left or right

while observing the door position as the plastic nut is turned which makes the door panels move up or

down at that location. Once t of doors is correct for both doors, tighten any loose nuts securely.

8d. Once all adjustments are made and both door panels are correctly in place, attach both Interior Wheel

Caps [10] and Exterior Roller Caps [6] and press to t.