Installation Guide

710352-100 Rev. B 7/16

Screw M4x12

ASSEMBLE FRAME

NOTE: TWO PEOPLE REQUIRED FOR THIS ASSEMBLY!

1. Attach the four Gaskets [18] to the top and bottom of both Fixed Panels [5]. Without all four gaskets in place on the

Fixed Panels, the doors may not operate correctly.

For the next few steps, work with the Bottom and Top rails and Fixed Panels on the floor.

Be sure to clear enough floor space in which to work.

2. Attach one of the Fixed Panels to the Bottom Horizontal Rail using a Spacer Block [16] and the Flat M4 x 35 Screws [2].

3. Secure the Fixed Panel to the Bottom Horizontal Rail with a Clip [17] and a M4 x 16 Screw [8]. Mount so that the Fixed

Panel extrusion is flush with the top and bottom rails. If not flush, turn the Fixed Panel vertically.

4. Repeat 2 and 3 for the second Fixed Panel.

5. Attach the Fixed Panels to the Top Horizontal Rail [14] following steps 2 thru 4.

Flat Screw

M4x35

Screw

M4x16

Fixed

Panel

Horizontal

Rail