Specifications sheet

F67
© 2010 AS America Inc.
PORTSMOUTH
™
ON/OFF & VOLUME CONTROL VALVES
GENERAL DESCRIPTION:
Cast brass valve body. Amarilis washerless ceramic disc
valve cartridge. Choice of 1/2" or 3/4" NPT inlets and outlets.
Trim is brass construction.
PRODUCT FEATURES:
Brass Construction: Durable - Excellent in high use
applications. Ideal for prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance.
SUGGESTED SPECIFICATION:
In-wall single valve shall feature a cast brass valve body. Model R701 shall feature combination 1/2" NPT threaded and direct
sweat inlets. 1/2" NPT female outlet. Model R711 shall feature 3/4" female inlet. 3/4" male outlet. Shall also feature 1/4 turn
washerless ceramic disc valve cartridges. Trim shall be constructed of brass. Fitting shall be American Standard Model #
T420.70_.___ (Trim) and R7_1 (Rough Valve Body).
R701
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASME A112.18.1
CSA B125.1
In-wall single valve. 1/2" inlet/outlet. Less handle.
R711
In-wall single valve. 3/4" inlet/outlet. Less handle.
FLOW RATE
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
0
5
10
15
20
** ROUGHS AND TRIMS MUST BE ORDERED SEPARATELY.
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
20 40 60 80 100
MODEL NUMBER:
TRIM KITS:
T420.700 Portsmouth On/Off & Volume Control
Valve Trim
Valve Trim ONLY. Lever Handle. LESS Valve.
T420.702 Portsmouth On/Off & Volume Control
Valve Trim
Valve Trim ONLY. Cross Handle. L
ESS
Valve.
ROUGH VALVE BODIES:
R701 On/Off & Volume Control Valve Rough
1/2" inlet/outlet. Less handle.
R711 On/Off & Volume Control Valve Rough
3/4" inlet/outlet. Less handle.
T420.700
On/Off & Volume Control Valve Trim. Lever Handle. LESS Valve.
Product
Number
Description
TRIM KITS**
Product
Number
Description
ROUGH VALVE
BODIES
T420.702 On/Off & Volume Control Valve Trim. Cross Handle. LESS Valve.
Model R701
Model R711
T420.700 Shown
FINISHED
WALL
2"
(51mm)
UNION INLET
1/2" - 14 NPT
OR
5/8" O.D. COPPER SWEAT
2-1/8"
(52mm)
DIA. HOLE
2-1/8"
(52mm)
DIA. HOLE
1/2" (13mm) NPT
FEMALE OUTLET
1/2" NPT 3/4" NPT
2-3/4"
(70mm)
2-3/4"
(70mm)
Model R701 Model R711
FINISHED
WALL
2-1/2"
(64mm)
3/4" (19mm) NPT
FEMALE THREADED
INLET
3"
(76mm)
3-3/4"
(95mm)
3/4'' (19mm) NPT
MALE THREADED
OUTLET
3-7/8"
(98mm)
3-3/4"
(95mm)
T420.730 Shown
Finish Options
Polished
Chrome
002
PVD
Blackened
Bronze
068
Oil
Rubbed
Bronze
224
PVD
Satin
Nickel
295