Product specifications

ManualsBrandsAmerican Standard ManualsConsumer electronicsAZEMT500BB32MAA

The AZEMT500B Thermostat is compatible with single and multistage forced air systems,

including:

• Gas furnace systems

• Oil furnace systems

• Electric furnace systems

• Heat pump systems

• Air conditioning cooling systems

The AZEMT500B Thermostat may be compatible with some other system types, including:

• Boiler systems

• Geothermal systems

• Multi-zoned systems

The AZEMT500B Thermostat is not compatible with the following system types:

• Radiant ﬂoor systems

• Wall heating systems

• Proprietary HVAC Communication Protocols

• 240 V Electric baseboard heating systems

Schlage LiNK™

Customer Service:

(877) 288-7707

Contents

Physical Installation and Wiring .......................................................................................................................................2

Field Wiring Diagrams .....................................................................................................................................................4

Enhanced Dehumidiﬁcation Mode ...................................................................................................................................7

Optional Remote Temperature Sensors Installation ........................................................................................................ 8

System Settings at Thermostat ......................................................................................................................................10

Perform System Checkout .............................................................................................................................................12

Enroll Thermostat into Schlage LiNK™ System .............................................................................................................13

Product Speciﬁcations ...................................................................................................................................................14

Operation .......................................................................................................................................................................15

Menu Maps ....................................................................................................................................................................16

User Settings .................................................................................................................................................................18

Installer Settings ............................................................................................................................................................22

Dehumidiﬁcation Options Settings .................................................................................................................................24

Dual Fuel Settings ..........................................................................................................................................................24

Schedules ......................................................................................................................................................................25

Limited Warranty ............................................................................................................................................................27

Î NOTE: A 24 Volt common and hot wire MUST be connected to the

AZEMT500B for operation.

Î The AZEMT500B Thermostat is compatible with dual fuel systems

(gas or oil furnace & heat pump combined) without adding a dual fuel

accessory relay kit.

Thermostat

Installation and User Instructions

Models AZEMT500BB32MAA

11-HD10D1-2

Summary of content (28 pages)

PAGE 1
Thermostat 11-HD10D1-2 Installation and User Instructions Models AZEMT500BB32MAA The AZEMT500B Thermostat is compatible with single and multistage forced air systems, including: • Gas furnace systems • Oil furnace systems • Electric furnace systems • Heat pump systems • Air conditioning cooling systems The AZEMT500B Thermostat may be compatible with some other system types, including: • Boiler systems • Geothermal systems • Multi-zoned systems The AZEMT500B Thermostat is not compatible with the following
PAGE 2
Physical Installation and Wiring 1 WARNING Voltage hazard. Can cause electrical shock or equipment damage. Disconnect power to heating and cooling equipment before beginning installation. 2 Remove the existing thermostat cover from the wall plate. Leave wires attached. The look of the existing thermostat may vary MERCURY NOTICE When this control is replacing an old control that contains mercury in a sealed tube, do not dispose of your old control in the trash. Dispose of properly.
PAGE 3
Remove existing wall plate. ÎÎ Note: During this process, make sure that the wires do not pull back into wall opening. a. b. Detach all wires from wall plate. Remove all screws attaching the wall plate to the wall and remove wall plate. ÎÎ See Mercury Notice on page . . Wall plate 4 Separate the face of the new thermostat from the wall plate. Apply pressure at two tabs on top of wall plate to release it.
PAGE 4
Field Wiring Diagrams The following table can be used to find the correct field connection wiring diagram for the HVAC System Type that is being installed.
PAGE 5
System Type B - 2 Stage Variable Speed Gas Furnace or Variable Speed Air Handler with 2 Step Cooling (Note 3, Note 4) Thermostat Connection Gas Furnace or Air Handler Outdoor Unit 24VAC Common B 24VAC Common B/C 24VAC Return R 24VAC Return R Heat Stage 1 W1 (Note 7) Heat Stage 2 W2 BLUE RED GREEN Compressor Stage 2 Y2 YELLOW YLO Remote Sensor 2 BROWN Compressor Stage 1 Y O (Note 1) (Note 2) Note 1 - Field installed jumper from R to O.
PAGE 6
System Type D - Variable Speed Air Handler or Furnace with 2 Step Heat Pump Note 3 Thermostat Connection Air Handler or Gas Furnace Outdoor Unit 24VAC Common B 24VAC Return R 24VAC Return R X2 Heat Stage 1 W1 O BLUE 24VAC Common B/C (Note 1) 24RC RED O GREEN Compressor Stage 1 Y1 Y1 Compressor Stage 2 Y2 Compressor Stage 1 Y2 Remote Sensor 2 YELLOW BROWN (Note 4) W1 HEAT Y2 Comp W2/O RS2 RS1 RS2 RS1 Sensor Shield Sensor Shield Remote Sensor 1 (Note 4) H1 E G AN R (Note 2) Y
PAGE 7
System Type F - Variable Speed Oil Furnace with 2 Step Cooling or Heat Pump R1 (Isolation relay, See R1 below) (Note 6) Thermostat Connection Oil Furnace- Variable speed Outdoor Unit 24VAC Common B 24VAC Common C 24VAC Return R 24VAC Return R (Note 4) X2 BLUE 24RC RED (Note 3) (Note 1) O O GREEN Fan G Compressor Stage 1 Y1 YLO Compressor Stage 2 Y2 Compressor Stage 1 Y Remote Sensor 2 YELLOW BROWN (Note 8) (Note 1) (Note 2) R (Note 3) (Note 4) Y1 Comp W1 HEAT Y2 Comp W2/O RS
PAGE 8
Optional Remote Temperature Sensors Installation Wire specification (RS1 & RS2): 2 conductors, 18 gauge wire. Make sure that the sensor wires have a cable separate from the thermostat cable. Best results for distances of 100 feet or less. Accuracy may be affected for distances up to a maximum of 200 feet. Shielded cable is recommended for distances over 100 feet and less than 200 feet.
PAGE 9
If necessary, cut the internal jumper wire (JP1). If only one wire is connected to either 24RC or 24RH as shown Do NOT cut JP1 jumper If wires are connected to both 24RC and 24RH as shown Cut JP1 jumper RC 24 G 24RC C Y1 H 4R Y2 2 RS 2 RS LD H S 24 2 W1 24RH /O W2 1 RS 1 RS D L SH 24RC W1 OR 1 JP ER MP T JU /RH CU RC LIT SP TO H1 HC 24RH W1 24RC 24RH W1 Cutting the JP1 jumper The jumper is located on back of the thermostat face as shown in the illustration to the right.
PAGE 10
System Settings at Thermostat 12 Set Time and Date a. Press the Menu button twice. User Settings 11:15 AM 75 MENU MODE FAN Scroll up Set Clock Filter Service Maint Service Screen Timeout 76 H 74 C Select Done RUN Scroll down Select button MENU button b. Scroll up or down to User Settings (it is the first option), then press the Select button. Set Clock Press  or  to highlight the data you want to change. Scroll up or down (+ or -) to make changes.
PAGE 11
14 Mechanical Settings a. b. c. d. e. 14A 11:15 AM 75 MENU MODE FAN 76 H 74 C RUN For Gas Furnace - Multistage Mechanical Settings a. b. c. d. 14B Press the MENU button twice. Press and hold the two inner buttons for 3 seconds to view Installer Settings Scroll down to System Settings and press the Select button. Scroll to Mechanical Settings (it is the first option), then press the Select button. Choose option A-D below: Scroll down to 2nd Stage Heat.
PAGE 12
15 Optional Remote Temperature Sensors Installation Remote sensor input RS2 can be configured for use as indoor or outdoor temperature sensing. An outdoor temperature sensor is required for Dual Fuel Restricted mode. The factory default setting for RS2 is “IN” for use with remote indoor temperature sensing and/or averaging. To configure RS2 to sense outdoor temperature, complete the following steps: a. b. c. d. e. f. Press the MENU button twice to access the Menu Selection screen.
PAGE 13
Enroll Thermostat into existing Schlage LiNK™ System 17 Prepare the bridge for enrollment. ÎÎ Note: If the bridge is already installed, follow the instructions as they are written in the following steps. If the bridge is not installed, follow the Quick Start Guide publication number shipped with the thermostat starter kit. a. b. c. d. Blue light Unplug Ethernet and power cables from bridge. Install a quality 9 volt battery. Verify that blue light is blinking. If blue light is solid, battery is dead.
PAGE 14
20 Establish Online Control of the Thermostat. Schlage LiNK account must be active before continuing. See link.schlage.com for more information. a. b. c. d. Remove the battery from the bridge. Plug the Ethernet and power cord back into the bridge. Log into your account at www.schlagelink.com Click the Climate tab and follow the on screen instructions. Exclusion (Only used to unenroll a thermostat from the bridge) a. b. Install a new, high-quality 9-volt battery into the bridge.
PAGE 15
Operation The model AZEMT500BB32MAA thermostat provides typical thermostat control of a central heating and cooling HVAC system. These thermostats also features a Z-Wave™ module for remote control.
PAGE 16
Minimized Display Mode Optionally, you can set the thermostat to show only the temperature in minimized display mode. This mode can be enabled or disabled in the Users Settings screen. ÎÎ See Screen Timeout for more information. 72 Menu Maps - User Settings User settings are accessed by pressing the MENU button on the main screen.
PAGE 17
Menu Maps - Installer Settings Installer settings are accessed by pressing the MENU button on the main screen then pressing and holding the two middle buttons until the Installer Settings appear.
PAGE 18
User Settings Filter Service The Filter Service screen will show the accumulated Runtime hours as well as the Service Interval that will be used to trigger a Filter Message. Any type of HVAC operation that causes the HVAC system fan to run will cause the Filter Runtime value to increase. When the Runtime hours equals the Service Interval hours, a “Filter” message to remind you to replace the filter. Once the filter has been replaced, press the Reset button to reset the Filter Runtime value to zero.
PAGE 19
Maintenance Service The Maintenance Service screen shows the accumulated Heat and Cool Runtime hours as well as the Service Interval that will be used to trigger a Maintenance Message. Any HEAT or COOL type of HVAC operation will cause the respective Runtime values to increase. When the combined HEAT and COOL Runtime hours equals the Service Interval hours, a “Maint” message to remind you your HVAC system may require periodic maintenance. Press the Menu button to enter the Filter Service screen.
PAGE 20
F/C Settings The F/C Settings screen is use to select the temperature display mode. Fahrenheit (F) or Celsius (C) are the two available modes. F/C Settings Change the Temperature Mode 1. Press the MENU button. 2. Scroll to User Settings and press the Select button. 3. Scroll to F/C Settings and press the Select button. 4. Press the plus (+) or minus (-) buttons to change the temperature mode. Select F for Fahrenheit or C for Celsius.
PAGE 21
Backlite/Display The Backlite/Display screen is used to set the backlight time-out and contrast. Backlite Timeout is the time (in seconds) from the last button press to the backlight going out. The time-out can be set between zero (0) and one hundred and twenty (120) seconds. Thirty (30) is the default setting. When set to zero (0), the backlight will remain always on. Contrast sets the contrast level of the LCD display. The contrast can be set between zero (0) and twenty (20).
PAGE 22
Installer Settings The Installer Settings screen is a hidden screen designed for use by qualified installers and service technicians. Do not change any settings in these screens unless you are a qualified installer or service technician. Installer Settings Display Lock System Settings Max Heat SP Min Cool SP 90 60 Done - + N Changing these settings will affect the operation of the heating/cooling system. To view and edit these settings: 1. 2. 3. 4. Press the MENU button.
PAGE 23
System Settings Changing these settings will affect the operation of the heating/cooling system. To view and edit these settings: 1. 2. 3. 4. 5. ÎÎ Press the MENU button. Press and hold the two middle buttons simultaneously until the Installer Settings menu is displayed. Scroll to System Settings and press the Select button. Scroll to the setting you want to change. Press the plus (+) or minus (-) button to adjust the setting. Press the Done button when you are finished.
PAGE 24
Mechanical Settings Changing these settings will affect the operation of the heating/cooling system. Options for mechanical setting will depend on the System Type selected. To view and edit these settings: 1. 2. 3. 4. 5. 6. Press the MENU button. Press and hold the two middle buttons simultaneously until the Installer Settings menu is displayed. Scroll to System Settings and press the Select button. Scroll to Mechanical Settings and press the Select button. Scroll to the setting you want to change.
PAGE 25
Schedules Scheduling is usually controlled by your Z-Wave system. See the instructions that came with your Z-Wave system for more information; however, scheduling may also be controlled by the thermostat. ÎÎ The Schedules menu is hidden by default, but may be enabled in the Installer Settings. See Enable/Disable the Schedules Menu below for more information.. The thermostat has a 4 x 7 schedule, meaning the setpoints can be changed up to four times a day each day. Each day has a separate schedule.
PAGE 26
View the Current Schedule 1. Press the MENU button. 2. Scroll to Schedules and press the Select button. 3. Scroll to Heat and Cool and press the Select button. 4. The schedule for the current day will be displayed. To view other days, press the Next button. Set a Heat and Cool Schedule 1. Press the MENU button. 2. Scroll to Schedules and press the Select button. 3. Scroll to Heat and Cool and press the Select button. 4. The schedule for the current day will be displayed.
PAGE 27
Warranty Limited Warranty Low Voltage Room Comfort Controls U.S.A. and Canada Only This limited warranty is extended by the manufacturer to the original purchaser and to any succeeding owner of the real property to which the low voltage room comfort control is originally affixed and applies to products purchased and retained for use within the U.S.A. and Canada.
PAGE 28
FCC Notice FCC ID WIBTZW008 INFORMATION TO USER This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to Part 15 of the FCC Rules.