Installation Guide

OWNERS MANUAL
Ovation Curve
™
Shower Bases
B8014A-ST3R / B8014A-ST3L / B8016A-ST3
B8017A-ST3 / B8015A-ST3
INSTALLATION INSTRUCTIONS
Thank you for selecting American Standard – the benchmark of ne quality for over 150 years. To ensure this
product is installed properly, please read these instructions carefully before you begin. Certain installations may
require professional help.
INSTALLATION PREPARATION
• Please unpack carefully and identify all parts needed for installation by using the Box Contents as a reference.
Inspect the product and report any damages or missing parts immediately to customer care by calling 800-
442-1902. Follow the prompts for consumer/bathing.
NOTE: Take extra care in handling edges and surfaces of bases. Use only non-abrasive cloths to
avoid scratching.
• The Ovation Curve Base dimensions are nominal and meant for a standard alcove. Please measure your
alcove to determine if the Ovation Curve Base will work in your alcove prior to installation.
• Ensure adequate wall support is provided to area where base is to be installed.
• Wear protective equipment during installation to avoid injury.
• Please keep these instructions for after care and customer service details.
BOX CONTENTS
B8014A-ST3L/R 60 X 30 B8017A-ST3.011 38 X 38 Corner
B8016A-ST3.011 36 X 36 Corner B8015A-ST3.011 48 X 30 Alcove
60 X 30 RHO/LHO B8014A-ST3 10 Clips
36 X 36 Corner B8016A-ST3 6 Clips
38 X 38 Neo Angle B8017A-ST3 6 Clips
48 X 30 Alcove B8015A-ST3 8 Clips
Trench/Drain Plate