Select Elongated Toilet Specification Sheet

ManualsBrandsAmerican Standard ManualsIndoor FurnishingChampion Select Round Front Toilet 4272.216

K27

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF

305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED

SEPARATELY.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of  xtures are nominal and may vary within the

range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility

is assumed for use of superseded or voided pages.

FINISHED WALL

19mm ± 6mm

(1 ± 1/4)

387mm

(15-1/4)

FINISHED

FLOOR

305mm

(12)

772mm

(30-3/8)

C/L OF OUTLET

83mm

(3-1/4)

216mm

(8-1/2)

470mm

(18-1/2)

C/L OF SEAT POST HOLES

140mm (5-1/2 CENTERS)

362mm

(14-1/4)

264mm

(10-3/8)

16mm

(5/8)

841mm

(33-1/8)

489mm

(19-1/4)

SUPPLY

REQ'D

254mm

(10)

152mm

(6)

254mm

(10)

356mm

(14)

To Be Speci ed:

❏ Color:

❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black

❏ Seat: (please specify color)

❏ Champion

Slow Close Elongated #5325.010

❏ Rise & Shine Elongated #5324.019

❏ Laurel Elongated #5311.012

❏ Supply with stop:

CHAMPION

SELECT

ELONGATED TOILET

VITREOUS CHINA

Revised 5/06

CHAMPION

SELECT ELONGATED TOILET

❑ 2087.212

• Vitreous china

• EverClean™ anti-microbial glaze

(available Summer 2006)

• Low-consumption (6.0 Lpf/1.6 gpf)

• Features Champion® Flushing System

performance platform

• 3" non-adjustable,  apper-free  ush valve

• Elongated siphon action jetted bowl

• 2-3/8" fully-glazed trapway

• Speed Connect™ tank/bowl coupling system

• Trip lever color-matched to toilet

• Sweeping pier on bowl

• 100% factory  ush tested

• 2 bolt caps

• 10 year warranty

❑ 3121.016 Elongated Bowl

❑ 4272.216 Tank

Nominal Dimensions:

772 x 489 x 841mm

(30-3/8" x 19-1/4" x 33-1/8")

Fixture only, seat and supply by others

Compliance Certi cations -

Meets or Exceeds the Following Speci cations:

• ASME A112.19.2M for Vitreous China Fixtures -

includes Flush Performance, Ball Pass Diameter,

Trap Seal Depth and all Dimensions

• Los Angeles Department of Water and Power

Supplementary Purchase Speci cation for

Non-Adjustability - July, 2003 revision