Elongated 10" Rough-In Toilet Specification Sheet

4
© 2008 AS America Inc.
COLONY™ FitRight™
ELONGATED 10" ROUGH-IN TOILET
VITREOUS CHINA

NN

NN

NN

NN

NN

NN

NN

NN

NN

NN

NN

NNNN
'*/*4)&%
8"--
'*/*4)&%
'-003
$-0'4&"51045)0-&4
NN$&/5&34
NN

4611-:
"4
3&2h%
NN

$-0'065-&5
NN


NN
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Seat: American Standard #5324.09 “Rise and
Shine" solid plastic closed front seat with cover.
❏ Seat: American Standard #53.02 “Laurel"
molded closed front seat with cover.
❏ Alternate Seat:
❏ Supply with stop:
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 254MM (0") FROM FINISHED WALL TO C/L OF OUTLET.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerance established by ANSI Standard A2.9.2
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
COLONY™ FitRight™ ELONGATED
10" ROUGH-IN TOILET
❑ 2485.010
• Vitreous china
• Low-consumption (6.0 Lpf/.6 gpf)
• 0" roughing-in
• Elongated siphon action jetted bowl
• Fully glazed 2" trapway
• Pilot valve water control
• 2" Flapper ush valve
• Color-matched trip lever
• Sanitary bar on bowl
• 2 bolt caps
• 00% factory ush tested
❑ 3189.016 Bowl
❑ 4006.016 Tank
Nominal Dimensions:
673 x 457 x 727mm
(26-/2" x 8" x 28-5/8")
Fixture only, seat and supply by others
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A2.9.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power
Supplementary Purchase Specication for
Non-Adjustability
8/08