Two-Handle Centerset Lavatory Faucet Specification Sheet

C89
© 2008 AS America Inc.
COLONY SOFT
TWO-HANDLE CENTERSET LAVATORY FAUCET
GENERAL DESCRIPTION:
Centerset lavatory faucet on 4" centers. 1/4 turn washerless
ceramic disc valve cartridges. Durable cast brass waterways
with one-half inch male inlet shanks. Metal body. 20" (500mm)
long flexible stainless steel drain cable is pre-assembled to
faucet body. Metal Speed Connect
®
drain body with 1-1/4 inch
(32mm) tail piece, (2275.409). Non-Metallic Speed Connect
drain body with 1-1/4 inch (32mm) tail piece, (2275.403). 1.5
gpm/5.7L/min. maximum flow rate. Clear Acrylic Handles are
facetted on the inside.
SUGGESTED SPECIFICATION:
Two-handle 4" centerset lavatory faucet shall feature a cast brass waterway. Shall also feature 1/4 turn washerless ceramic
disc valve cartridges. Shall also feature a drain body with stainless steel cable actuation. Fitting shall be American Standard
Model # 2275.40__.____.
MODEL NUMBER:
2275.403 Colony 2 Handle Centerset
Clear Acrylic Handles. Non-metalic Speed Connect
®
Pop-up drain.
2275.409 Colony 2 Handle Centerset
Clear Acrylic Handles. Metal Speed Connect
Pop-up drain.
PRODUCT FEATURES:
Cast Brass Waterways with “City Shanks”: Strong and
durable. Integral tabs on casting provide a wobble-free
installation.
Ceramic Disc Valve Cartridges: Assures a lifetime of
smooth handle operation and drip-free performance.
Reversible for use on either “hot” or “cold” side.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65 lead
requirements.
Exclusive Speed Connect Metal Drain:
• Fewer parts. Installs in less time.
• No adjustments required - seals the first time, every time.
• Flexible stainless steel cable - installs effortlessly in tight spaces.
Longer Spout: Provides extended reach into lavatory.
Simple Installation: Fast and easy one person installation.
Faucet drops in from top. Quick spin nuts secure faucet in
place.
2275.409
2275.403
Colony 2 Handle Centerset. Clear Acrylic Handles.
Non-metalic Speed Connect
®
Pop-up drain.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASME A112.18.1
CSA B125
NSF 61/Section 9
Product
Number
Description
Finish
Polished
Chrome
002
C
H
2275.400 Shown.
102mm
(4")
154mm
(6-1/16")
107mm
(4-3/16")
107mm
(4-3/16")
41mm
(1-5/8")
22mm
(7/8")
1/2 NPSM
HOLE
SIZE
29mm
(1-1/8")
28mm
(1-1/16")
Colony 2 Handle Centerset. Clear Acrylic Handles.
Metal Speed Connect Pop-up drain.
32mm OD
(1-1/4 OD)
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
10080604020