Compact Right Height Elongated Toilet Specification Sheet

COMPACT™ RIGHT HEIGHT™
ELONGATED TOILET
VITREOUS CHINA
COMPACT™ RIGHT HEIGHT™ EL TOILET
❏ 3505.000
• Vitreous china
• Low-consumption (1.6 gpf/6.0 Lpf)
• Exclusive space saving feature
• Elongated siphon action bowl
• Fully glazed trapway
• Close-coupled tank
• Sanitary bar on bowl
• 2 bolt caps
• 100% factory flush tested
❏ 3029.016 Bowl
❏ 4010.012 Tank
Nominal Dimensions:
27-1/2" x 19" x 31-3/8"
(699 x 483 x 769mm)
Fixture only, seat and supply by others
To Be Specified
❏ Seat: American Standard #5324.019 "Rise and
Shine" (with easy to clean lift-off hinge system)
solid plastic closed front seat with cover.
See page TB-001.
❏ Seat: American Standard #5311.012 "Laurel"
molded closed front seat with cover.
See page TB-001.
❏ Alternate Seat:
❏ Supply with stop:
©2002 American Standard Inc.
6/02
SPS 3505.000
187mm
(7-3/4)
25mm ± 6mm
(1 ± 1/4)
16mm
(5/8)
419mm
(16-1/2)
470mm
(18-1/2)
248mm
(9-3/4)
235mm
(9-1/4)
165mm
(6-1/2)
305mm
(12)
699mm
(27-1/2)
C/L OF SEAT
POST HOLES
140mm (5-1/2)
CENTERS
FINISHED
FLOOR
83mm
(3-1/4)
FINISHED WALL
152mm
(6)
222mm
(8-3/4)
SUPPLY
AS
REQ'D
368mm
(14-1/2)
*
*
769mm
(31-3/8)
483mm
(19)
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM
(12") FROM FINISHED WALL TO C/L OF OUTLET.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance
established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is assumed for use
of superseded or voided pages.
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M (and 19.6M) for Vitreous
China Fixtures - includes Flush Performance,
Ball Pass Diameter, Trap Seal Depth and
all Dimensions