Specification Sheet

ManualsBrandsAmerican Standard ManualsPopular CollectionsAmerican Standard Estate Pressure Balanced Shower System with Shower Head, Hand Shower, Slide Bar, Shower Arm, Hose, Wall Supply Elbow, Tub Spout, Diverter, and Valve Trim

Estate

Water-Saving Pressure Balance Bath/Shower Trim

with Double Ceramic Pressure Balance Cartridge

MODEL NUMBER:

TRIM KITS:

❏ TU722508 Estate Bath/Shower Trim Kit with Pres-

sure Balance Cartridge

Lever handle. Water-saving showerhead. LESS valve body.

❏ TU722507 Estate Shower ONLY Trim Kit

with Pressure Balance Cartridge

Lever handle. Water-saving showerhead. LESS valve body.

For use with Flash

™

Rough Valve Bodies

TU184508 Bath/Shower Trim Shown

SUGGESTED SPECIFICATION

Bath/shower tting shall feature water saving 3-function showerhead with Max. 1.75 gpm/6.6 L/min. ow rate. Shall feature

double ceramic pressure balance cartridge which is capable of back-to-back installation. Cartridge shall feature integrated

check valves to eliminate cross ow. Capable of meeting ASSE1016 @1.3gpm. Cartridge shall also feature hot limit safety stop.

Fitting shall be: American Standard - Trim Kit Model # TU72250_.___ and Flash Valve Body Model # RU10___.

GENERAL DESCRIPTION:

Double Ceramic Pressure Balance Cartridge: Features

one-piece design with ceramic discs and ceramic balancing

spool. Includes integrated check valves and hot limit safety

stop. Cartridge is back to back capable. Ceramic balancing

spool maintains constant output temperature in response to

changes in relative hot and cold supply pressure. Washerless

ceramic discs provide smooth handle movement and are

unaffected by harsh water conditions. Cycles from “off” to

“cold” to “hot”.

Trim: Features water-saving 5" 3-function showerhead with a

maximum 1.75 gpm/6.6 L/min. ow rate. Metal slip-on diverter

spout. Metal wall valve trim with metal lever.

PRODUCT FEATURES

One-Piece Cartridge: Simplies installation and maintenance.

Double Ceramic Pressure Balance Cartridge:

Combination of Ceramic Disc Mixing Valve and a Ceramic

Balancing Spool in a one-piece cartridge.

Ceramic Disc Mixing Valve: Assures a lifetime of drip-free

performance and smooth handle operation.

Ceramic Balancing Spool: Maintains a constant output

temperature in response to changes in relative hot and cold supply

pressure. Ceramic material is unaffected by mineral deposits and

harsh water conditions.

Integrated Check Valves: Engineered to eliminate cross ow.

Adjustable Hot Limit Safety Stop: Limits the amount of hot water

allowed to mix with cold. Reduces the risk of accidental scalding.

Comfort Zone: Offers a wider shower range to ne tune the

desired temperature within the useful temperature zone

Back-to-Back Capability: Hot and cold can be reversed quickly

and easily.

Water Saving: Saves 30% water usage.

8/18

OFF

Includes

Cartridge

OFF

FINISHED WALL

TOP OF TUB RIM

BOTTOM OF TUB

74" (1879 mm)

FOR HEAD

CLEARANCE

3-3/4"

(97 mm)

2" TO 3"

(51 TO 76 mm)

18" (457 mm)

OPTIONAL

7-1/16"

(179 mm)

7-5/8"

(207 mm)

1/2" NPT

1/2" COPPER

FOR SLIP-ON

SPOUT

7-13/16" DIA.

(198 mm)

1-1/2"

4-11/16"

(121 mm)

7-3/8"

(187 mm)

9-1/2"

(223 mm)

OPTIONAL TO FINISHED

FLOOR USUALLY

BETWEEN 65'' AND 78"

(1651 AND 1981 mm)

(160 mm)

2-3/4"

(83 mm)

2-3/4" MAX. (69 mm)

1-3/4" MIN. (45 mm)

(127 mm)

Summary of content (12 pages)

PAGE 1
Estate® Water-Saving Pressure Balance Bath/Shower Trim with Double Ceramic Pressure Balance Cartridge MODEL NUMBER: TRIM KITS: ❏ TU722508 Estate Bath/Shower Trim Kit with Pressure Balance Cartridge Lever handle. Water-saving showerhead. LESS valve body. ❏ TU722507 Estate Shower ONLY Trim Kit with Pressure Balance Cartridge OFF Lever handle. Water-saving showerhead. LESS valve body.
PAGE 2
Estate® Water-Saving Pressure Balance Bath/Shower Trim with Double Ceramic Pressure Balance Cartridge CODES AND STANDARDS FLOW RATE* ASSE 1016 / ASME A112.18.1016 / CSA B125.16 ASME A112.18.1 / CSA B125.1 Rated to meet ASSE 1016 @ 1.3gpm GALLONS PER MINUTE These products meet or exceed the following codes and standards: Spout Shower 8 6 4 2 0 20 40 60 80 100 INLET PRESSURE (PSI) *Flow rates shown are for mixed hot and cold.
PAGE 3
Flash™ Rough Valve Bodies MODEL NUMBERS: ❏ RU101 Flash Rough Valve Body with Flash Connections ½" Universal inlets/outlets. ❏ RU101SS Flash Rough Valve Body with Flash Connections with Screwdriver Stops ½" Universal inlets/outlets. ❏ RU102 Flash Rough Valve Body with Stub-Out Connections ½" Stub-out inlets/outlets. ❏ RU102SS Flash Rough Valve Body with Stub-Out Connections with Screwdriver Stops ½" Stub-out inlets/outlets.
PAGE 4
Flash™ Rough Valve Bodies UNIVERSAL PLASTER GUARD 4-7/16" (113 mm) FRONT VIEW 4-7/8" (123 mm) RU101 RU101SS INLETS 3-1/2" (89 mm) INLETS ½" NOM. COPPER ½" NOM. COPPER SWEAT or ½" MALE NPT SWEAT or ½" MALE NPT OUTLETS ½" NOM. COPPER SWEAT or ½" MALE NPT 3-5/8" (92 mm) OUTLETS ½" NOM.
PAGE 5
Flash™ Rough Valve Bodies CODES AND STANDARDS FLOW RATE* 8 GALLONS PER MINUTE These products meet or exceed the following codes and standards: ASSE 1016 / ASME A112.18.1016 / CSA B125.16 ASME A112.18.1 / CSA B125.1 Spout 6 4 2 0 20 40 60 80 100 INLET PRESSURE (PSI) *Flow rates shown are for mixed hot and cold. Flow Rate from tub spout when used with Double Ceramic Pressure Balance Cartridge.
PAGE 6
SPECTRA+ HANDHELD™ KIT 4-FUNCTION HAND SHOWER KIT MODEL NUMBER: ❏ 1660.774 Shower System Kit 1.8 version Inc ludes: • Spectra+ Handheld™ • Slide Bar • Hose • Wall Supply 9038.154 1660.730 8888.035 8888.037 1-3/4" (45 mm) 1-3/4" (43 mm) 1-1/16" (26 mm) 1/2" (13 mm) WALL SUPPLY WITH BUILT IN BACK FLOW PREVENTER 1/2 N.P.T.
PAGE 7
SPECTRA+ HANDHELD™ KIT 4-FUNCTION HAND SHOWER KIT FLOW RATE These products meet or exceed the following codes and standards: ASME A112.18.1 CSA B125.1 GALLONS PER MINUTE CODES AND STANDARDS 1.8 1.7 1.6 1.5 0 20 40 60 80 INLET PRESSURE (PSI) Finish Product Number 1660.774 Description Brushed Nickel Polished Nickel Legacy Bronze Polished Chrome 295 013 278 002 Spectra+ Handheld™ Kit. Contains Spectra+™ hand shower, slide bar, hose and wall supply. © 2017 AS America, Inc.
PAGE 8
ESTATE® IN-WALL DIVERTER VALVES MODEL NUMBER: TRIM KIT: ❏ T722.430 Diverter Valve Trim Valve trim ONLY. LESS Valve. ROUGH VALVES BODIES: ❏R 422 Two-Way In-Wall Diverter Valve Rough (Discrete) 1/2" NPT inlets/outlets. 2 Discrete functions. LESS Handle. ❏ R422S Two-Way In-Wall Diverter Valve Rough (Shared) 1/2" NPT inlets/outlets. 2 Discrete/1 Shared functions. LESS Handle. ❏ R433 Three-Way In-Wall Diverter Valve Rough (Discrete) 1/2" NPT inlets/outlets. 3 Discrete functions. LESS Handle.
PAGE 9
ESTATE® These products meet or exceed the following codes and standards: ASME A112.18.1 16 14 12 10 8 6 4 2 0 FLOW RATE - R422 Port A Tub Port GALLONS PER MINUTE CODES AND STANDARDS GALLONS PER MINUTE IN-WALL DIVERTER VALVES 20 30 40 50 60 70 80 16 14 12 10 8 6 4 2 0 FLOW RATE - R433 20 Port A Tub Port Tub Port + Port A 20 30 40 50 60 70 80 16 14 12 10 8 6 4 2 0 INLET PRESSURE (PSI) TRIM KITS * T722.430 Diverter Valve Trim. LESS valve.
PAGE 10
ROUGH VALVES IN-WALL THREE-WAY DIVERTER VALVES MODEL NUMBER: ❏ R433 Three-Way In-Wall Diverter Valve Rough (Discrete) 1/2" NPT inlets/outlets. 3 Discrete functions. Less Handle. ❏ R433S Three-Way In-Wall Diverter Valve Rough (Shared) 1/2" NPT inlets/outlets. 3 Discrete/3 Shared functions. Less Handle.
PAGE 11
ROUGH VALVES IN-WALL THREE-WAY DIVERTER VALVES CODES AND STANDARDS GALLONS PER MINUTE These products meet or exceed the following codes and standards: ASME A112.18.1 CSA B125.1 16 14 12 10 8 6 4 2 0 FLOW RATE - R433 Port A/B Tub Port 20 30 40 50 60 70 80 INLET PRESSURE (PSI) Meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged.
PAGE 12
Wall Mount Tub Spout Model # Description 8888107 Slip-On Non-Diverter Tub Spout • For 1/2" copper pipe • Metal Construction • 7-3/4" length to center of outlet Roughing-In Dimensions Finishes .002 .295 .013 .278 Polished Chrome Brushed Nickel (PVD) Polished Nickel Legacy Bronze 8" (207 mm) 1-1/2" 7" (177 mm) 8888106 Non-Diverter1/2 IPS Tub Spout • For 1/2" copper pipe • Metal Construction • 7-3/4" length to center of outlet .002 .295 .013 .