Service Sink Specification Sheet

M34
© 2008 AS America Inc.
Revised 8/05
To Be Specied:
❏ Faucet: 8344.112 faucet with top brace,
stops, and vacuum breaker
❏ Alternative Faucet:
❏ Drain: 7721.038 at grid drain
❏ Removable vinyl-coated rim guard:
7745.811 (black)
FLORWELL™
SERVICE SINK
ENAMELED CAST IRON
FLORWELL™ SERVICE SINK
• Enameled cast iron
• 3" outlet
• Corner model
❏ 7741.000 Fixture only - Less rim guard
❏ 7745.811 Removable vinyl rim guard
Nominal Dimensions:
711 x 711 x 330mm
(28" x 28" x 13")
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.1 for Cast Iron Plumbing Fixtures
NOTES:
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
13
(330mm)
13
(330mm)
13
(330mm)
5
(127mm)
8
(203mm)
2
(51mm)
3 N.P.T. INSIDE THDS
1/4 (6mm)
48
(1219mm)
28
(711mm)
3/4
(19mm)
3/4
(19mm)
3/4
(19mm)
1 x 3
(25 x 76mm)
SUPPORTING
CLEAT ON
BOTH WALLS
12-1/4
(311mm)
28
(711mm)
FINISHED WALL
NOTE: SUPPLY FITTING CAN BE
PLACE ON EITHER WALL
C/L OF
SPOUT BRACE
1/2 NPT
SUPPLIES
FINISHED WALL
FINISHED WALL
PLAN VIEW
8
(203mm)
9
(229mm)
ROUGH
FLOOR