Premium Air Bath Specification Sheet
H12
© 2008 AS America Inc.
Rev. 2/08
LEVELING STRINGER NOT
FOR SUPPORT
60
(1524mm)
36
(914mm)
11-1/2
(292mm)
OUTLINE OF CUTOUT 58.5 x 34.5 (1486 x 876mm)
14-3/4
(375mm)
CONTROL
PANEL
BLOWER
CUTOUT IN FLOOR FOR DRAIN
20 AIR JETS
9
(229mm)
C
L
PROVIDE ACCESS TO BLOWER FOR
SERVICE ON ALL INSTALLATIONS
GREEN TEA 5' x 36"
MODEL 3571.328
ROUGH
FLOOR
1-1/2" O.D. TAILPIECE
508mm
(20")
INTEGRAL FEET
WITH ATTACHED
BASEBOARD
51mm
(2")
559mm
(22")
1-1/2" N.P.T.M. THREADS
35mm
(1-3/8")
98mm
(3-7/8")
C
L
TO OVERFLOW
60 x 36 x 22 In. (1524 x 914 x 559mm)
86 Lbs. (39 Kg.)
519 Lbs. (235 Kg.)
52 Gal. (197 L.)
38 Gal. (144 L.)
19 x 43 In. (483mm x 1092mm)
48-1/2 x 27 In. (1232mm x 686mm)
14 In. (356mm)
35 Lbs./Sq. Ft. (169 Kgs/Sq. m.)
23.8
44.5
GENERAL SPECIFICATIONS FOR 3571
AIR BATH SYSTEM
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
MIN. OPERATING GAL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
3
)
ELECTRICAL SPECIFICATIONS
1.0 HP, 10 AMPS, 120V.BLOWER
102mm (4")
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUMP OF
BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS.
■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
OPTIONAL 3 WALL TILING BEAD. KIT AVAILABLE AND MUST BE ORDERED SEPARATELY.
● FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
● IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING
SYSTEM PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION. MOUNTING HOLES DRILLED BY INSTALLER.
Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaet.