Operating instructions

Pub. No. 18-HE56D1-9 3

Installer's Guide

Unpack the Air Cleaner and check to make sure all compo-

nents are included. They consist of:

1) PRE-FILTER - traps large particles such as hair and lint

before they can enter the cell section.

2) FIELD CHARGER - charges the contaminants. Only to

be removed, cleaned or serviced by a qualified

technician.

3) COLLECTION CELL (2) - removes and collects small

impurities from the air.

4) FILTER MOUNT RAIL (2) - mounts into existing cabinet

and is used to hold the filter components in place. Rail is

also used to activate the safety power switch.

5) POWER DOOR - the solid state power supply components

that convert the 24 Volt AC to the high-voltage, direct

current required to power the FIELD CHARGER and

COLLECTION CELLS. Allows access to the COLLEC-

TION CELLS, FIELD CHARGER and PRE-FILTER.

6) TRANSFORMER - supplies 24 Volts to the indoor unit and

air cleaner.

7) 24 VOLT POWER/ CONTROL CABLE

8) GASKET, LITERATURE AND HARDWARE PACKET

9) TEMPLATE, BLUNT TIP SCREWS AND DRILL BIT KIT -

used to mount rails.

10) INSULATOR FILM - supplied with 3 different thicknesses.

11) UPFLOW AIR HANDLER BAFFLE - This baffle is only

included with Air Handler models.

Check carefully for any shipping damage. This must be

reported to and claims made against the transportation

company immediately. Check to be sure all major compo-

nents are in the unit. Any missing parts should be reported

to your supplier at once, and replaced with authorized

parts only.

Figure 1 Components of the Air Cleaner Upgrade Kit