Specifications

ManualsBrandsAmerican Standard ManualsIndoor FurnishingInnsbrook Lavatory Faucet M968498

(In Toronto Area only: 1-905-3061093)

Innsbrook Lavatory Faucet

with SELECTRONIC™ Technology

To l e a r n more a b o u t Amer i c a n S tandard Fa u c e t s v i s i t o u r website a t : www.us.amstd.com or U.S.

customer's e-mail us at: faucetsupport@amstd.com

For Parts, Service, Warranty or other Assistance,

please call

1-800-442-1902 (In Canada: 1-800-387-0369)

NOTE TO INSTALLER: Please give this manual to the customer after installation.

(In Toronto Area only: 1-905-3061093)

Installation InstructionsInstallation Instructions

Product No.'s & Options

Speciﬁcations

How to Install

Electrical Hook-up

Maintenance

FAQ,s

Replacement Parts

2-3

4-6

7-8

M968498 Rev.1.5

Certiﬁed to comply with ASME A112.18.1M

6055.202

6055.205

6055.204

6056.202

6056.205

6056.204

6057.202

6057.205

Summary of content (12 pages)

PAGE 1
I n s t a l l a t i o n I n s t ru c t i o n s Innsbrook Lavatory Faucet with SELECTRONIC™ Technology 6055.204 6056.204 6057.205 6055.205 6056.205 6057.202 6055.202 6056.202 Product No.'s & Options 1 Certified to comply with ASME A112.18.1M © 2010 American Standard Specifications 2 How to Install 2-3 Electrical Hook-up 4-6 Maintenance 7-8 FAQ,s 9 Replacement Parts 10 M968498 Rev.1.5 NOTE TO INSTALLER: Please give this manual to the customer after installation.
PAGE 2
Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years.To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin. All American Standard Faucets Are Water Tested At Our Factory. Some Residual Water May Remain In The Faucet During Shipping. UNPACKING 1. Remove the fitting and loose items from the carton. The illustration below shows the fitting and all loose items after they have been removed from the carton.
PAGE 3
Fig. 1 Roughing-in Dimensions 175mm (6-7/8) 162mm (6-3/8) 155mm (6-1/8) 124mm (4-7/8) MOUNTING SURFACE 108mm (4-1/4) 38mm (1-1/2) MAX. 35mm (1-3/8) DIA. 3 HOLES 57mm (2-1/4) 125mm (4-7/8) 102mm (4) 114mm (4-1/2) GENERAL DESCRIPTION: Electronic faucet with proximity operation. Vandal resistant solid brass construction 4" center to center mounting. Operates on DC (battery) or AC permanent power. In-line strainer for solenoid is integral.
PAGE 4
2 MOUNT ENCLOSURE; Fig. 2 Fig. 2 1. Determine location of ENCLOSURE (1). It must be located with-in the 14" (356mm) by 21" (533mm) shaded area shown in Figure 2 in order for electrical connections from the spout assembly to be made. NOTE: ENCLOSURE SUPPLY HOSE is 20". Distance between wall supply and ENCLOSURE (1) must be taken into consideration. 14" (356mm) SUPPLIES ENCLOSURE MOUNTING HOLES 1 2-3/4" (71mm) 2. Remove 4 screws from COVER (2) and pull off COVER (2).
PAGE 5
Fig. 1 ELECTRICAL INSTALLATION 1 DC VERSION (BATTERY); Fig. 1 4 1 5 1. Remove ENCLOSURE COVER (1). Fig. 1. 2. Feed the WIRE CONNECTORS (2) through the top of ENCLOSURE (5). Fig. 1a. 3. Remove GROMMET (4) from ENCLOSUR (5). Fig.1. Fig. 1b Fig. 1a 4. Feed the gray SENSOR WIRE (7) through GROMMET (4), 4" from CONNECTOR. Fig. 1b & 1d Insert gray SENSOR WIRE (7) into SPLIT PLUG (9). Push SPLIT PLUG (9) into GROMMET (4) to seal. Fig. 1d. 4" 5 4 7 5. Insert GROMMET (4) back into ENCLOSURE (5). Fig. 1c.
PAGE 6
2 AC VERSION; Fig. 2 CAUTION Fig. 2 Before opening ENCLOSURE disconnect AC power supply. 4 1 5 1. Remove ENCLOSURE COVER (1). Fig. 2. 2. Feed the WIRE CONNECTORS (2) through the top of ENCLOSURE (5). Fig. 2a. 3. Remove GROMMET (4) from ENCLOSUR (5). Fig. 2. 4. Feed the gray SENSOR WIRE (7) through GROMMET (4), 4" from CONNECTOR. Fig. 2b. Insert gray SENSOR WIRE (7) into SPLIT PLUG (9). Push SPLIT PLUG (9) into GROMMET (4) to seal. Fig. 2e. Fig. 2b Fig. 2a 5 4" 5.
PAGE 7
Fig. 3 Unit #1 Unit #2 Unit #3 TWO PIECE GROMMET 1 4" 1 1 3 FOR AC-VERSION (MULTI HOOK-UP); Fig. 3, 4 1. See AC Version Electrical Hook-up for first unit of the Multi hook-up. Fig. 4 TWO PIECE GROMMET 2. Remove ENCLOSURE COVERS from all ENCLOSURES. 8 7 3. Remove SOLID BLACK INSERT(1) from right side of ENCLOSURE #1 and replace with gray 2-PIECE GROMMET (3). Replace solid black inserts on Unit #2 with gray 2-PIECE GROMMET (3). 4. Take the 10 ft.
PAGE 8
MAINTENANCE Fig 1 T IO N DETEC E ZON 1 HAND WASH SENSOR OPERATION 10 4 Fig. 1 6 3 When the Sensor detects a user, the water immediately starts to flow. Water flow will stop Two seconds after user is out of sensor range. The off delay allows the user to comfortably move his hands without the flow cycling on to off. As a precaution, a safety timer will turn off the water, after the sensor has been blocked for 59 seconds. The water will stay off until the blockage is removed from the detection zone.
PAGE 9
4 HOW TO CLEAN FILTER; Fig. 4 CAUTION Fig.4 Before opening ENCLOSURE disconnect AC power supply. 1. Remove ENCLOSURE COVER. 2. Close SUPPLY STOP (5) with 4mm Hex wrench. Note: Keep water flowing out of faucet while shutting off. 3 3. Pull off Red (1) and Black (2) CONNECTORS from SOLENOID VALVE (3). 4 CLEAN SCREENS 4. Unthread STRAINER (4) using a 7/16" socket. 5. Pull out the STRAINER (4) and clean with an old toothbrush. Rinse thoroughly with water. 6.
PAGE 10
FAQ'S Q: How will I know if battery needs to be replaced? A: Valve does not open and sensor blinks 2 times interrupted by pause for up to 7 days. Q: Why does the faucet operate the opposite of expected-Turns On when not in sensor range, but turns off when in sensor range? A: Sensor wires to solenoid are reversed. Black to & Red to + is correct. Q: Why has the flow rate of the faucet reduced significantly? A: Check and clean aerator and strainer.
PAGE 11
INNSBROOK with SELECTRONIC M922286-YYY0A 0.35 GPM AERATOR (6055.204, 6056.204) LAVATORY FAUCETS PRODUCT NUMBERS M922887-YYY0A 1.5 GPM AERATOR 6055.204 6056.204 6057.205 6055.205 6056.205 6057.202 6055.202 6056.202 066508-YYY0A 0.5 GPM AERATOR M962409-0070A SENSOR KIT M964155-0070A SENSOR KIT FOR (6055.204, 6056.
PAGE 12
M 9 6 8 4 9 8 R ev. 1.