Specification Sheet

© 2016 Fiat Products
FIAT
PRODUCTS
®
Customer Service Canada
1-800-387-0369
www.fiat.ca
Customer Service United States
1-800- 442-1902
www.fiatproducts.com
Revised 10/16t
SERV-A-SINK
®
LAUNDRY TUBS
MODELS FL-1, L-1, DL-1
FL-1 FLOOR MOUNTED SERV-A-SINK
®
L-1 WALL HUNG SERV-A-SINK
®
DL-1 DROP-IN SERV-A-SINK
®
Fiat Products uses a specialized SMC process
(Molded Stone
®
) to manufacture all laundry tubs.
Moldings are manufactured in matched metal
dies under heat and pressure resulting in a
homogeneous molded unit. Drain(s) with stopper(s)
are furnished as standard equipment. Capacity
shall be 76 litres (17 Imp gal) for the single tub sink
and 152 litres (33 Imp gal) for the double tub sink.
Laundry sinks available in white only.
• All single compartment laundry tubs are available
in sixpacks (L-6 and FL-6) and bulk quantities.
• All products must be installed in accordance with
installation instructions provided. Failure to do so
may invalidate warranty at manufacturer's
discretion.
FL-1 Floor Mounted Serv-A-Sink
®
• White baked enamel angle legs that slip into
molded sockets for rigid, friction-t. (Included)
• Easy leveling devices are provided for fast, even
planing. Tub is capable of handling 600 pounds.
Nominal Dimensions:
20-1/4" x 17-1/4" x 13" (514 x 438 x 330mm)
34-3/4" (883mm) CSA Approved
L-1 Wall Hung Serv-A-Sink
®
• Heavy gauge galvanized - steel bracket capable of
withstanding 600 pounds. (Included)
• Side llers and bottom tub support, which are
assembled in eld to the mounting brackets, are
made of white molded plastic polymer.
Nominal Dimensions:
20-1/4" x17-1/4" x 13" (514 x 438 x 330mm)
DL-1 Drop-In Serv-A-Sink
®
• Designed for a countertop installation.
• Self-rimming ange, four locking corner bars and
screws for fast tightening into integral molded
mounting legs and against the underside of the
countertop. (Included)
Nominal Dimensions:
22-1/8" x 17" x 12-3/7" (562 x 432 x 324mm)
Underside ange rim sealant for watertightness
supplied by others.
All products are UPC listed
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
FL-1 Floor Mounted Serv-A-Sink
®
L-1 Wall Hung Serv-A-Sink
®
DL-1 Drop-In Serv-A-Sink
®