Flushometer Toilet Specification Sheet

ManualsBrandsAmerican Standard ManualsIndoor FurnishingMadera 3466.160

M58

NOTES:

PRODUCT 3451.160 AND 3453.160 SHOWN, 3452.160 AND 3455.160

SAME AS EXCEPT WITH SLOTTED RIM FOR BED PAN HOLDING.

TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM

BREAKER ON THE FLUSHOMETER VALVE, THE PLUMBER MUST

VERIFY DIMENSIONS SHOWN FOR SUPPLY ROUGHING.

THIS TOILET DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION

OF 254MM (10") AND A MAXIMUM DIMENSION OF 305MM (12") FROM

FINISHED WALL TO C/L OF OUTLET.

FLUSHOMETER VALVE NOT INCLUDED WITH FIXTURE AND MUST BE

ORDERED SEPARATELY. FLUSHOMETER VALVE REQUIREMENTS FOR

12" (305MM) ROUGH-IN: SWEAT EXTENSION NIPPLE IS REQUIRED.

REFER TO VALVE MANUFACTURER AND LOCAL CODES.

IMPORTANT: Dimensions of xtures are nominal and may vary within

the range of tolerances established by ANSI Standard A112.19.2. These

measurements are subject to change or cancellation. No responsibility is

assumed for use of superseded or voided pages.

238mm

(9-3/8)

419mm

(16-1/2)

438mm

(17-1/4)

470mm

(18-1/2)

356mm

(14)

338mm

(13-5/16)

150mm

(5-7/8)

254mm

(10)

13mm

(1/2)

76mm

(3)

718mm

(28-1/4)

C/L OF SEAT POST HOLES

140mm (5-1/2) CENTERS

FINISHED WALL

FINISHED

FLOOR

C/L OF OUTLET

MADERA™ 16-1/2" HEIGHT

1.6 GPF FLUSHOMETER TOILET

711mm

(28)

1 - 1/2

SPUD

121mm

(4-3/4)