Specification Sheet

B1
© 2016 AS America Inc.
UPGRADABLE
PRESSURE BALANCE BATH/SHOWER FITTING
TEMPERATURE CONTROL VALVE
PRODUCT FEATURES:
Cast Brass Valve Body: Durable - Quality that will last a
lifetime. Ideal material for prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance. Allows easy fine tuning of temperature
(125˚handle rotation from off to hot).
Pressure Balancing Valve Cartridge: Maintains constant
output temperature in response to changes in hot and cold
supply pressure. Diaphragm system with integrated check
valves engineered to eliminate cross flow. Avoids failure due to
mineral deposits - ideal for use in hard water.
Back-to-Back Capability: Hot and cold can be reversed
quickly and easily.
Adjustable Hot Limit Safety Stop: Limits the amount of
hot water allowed to mix with cold. Reduces the risk of
accidental scalding.
Exclusive Plaster Guard: Plaster guard is designed to
protect valve during installation and serve as a mounting plate
for thin-wall installations. 2-piece design allows valve to be
tested prior to trim installation.
Wide Rough-in Range: From 1-5/8" to 3-1/4".
SUGGESTED SPECIFICATION:
Bath/shower fitting shall feature a cast brass body. Shall feature ceramic disc valve cartridge which is capable of back-to-back
installation. Fitting shall be equipped with pressure balancing cartridge engineered to eliminate cross flow and avoid failure
due to mineral deposits. Shall also feature hot limit safety stop. Fitting shall be: Rough Valve Body - American Standard
Model # R11____, Trim Kit - American Standard Model # ____.____.
GENERAL DESCRIPTION:
Cast brass body, washerless ceramic disc valve cartridge with
back-to-back capability, integrated check valves and hot limit
safety stop. Cycles from "off" to "cold" to "hot". Pressure
balancing cartridge maintains constant output temperature in
response to changes in relative hot and cold supply pressure.
One-half inch inlets and outlets (choice of universal, direct
sweat, threaded, PEX or CPVC). Available with screwdriver
stops. Rough-in plaster guard designed for use as thin-wall
mounting adaptor. Valve body will accept a variety of
decorative Bath/Shower trims.
R110 Valve Body Shown
Available Trim Kits
Colony
®
Town Square
®
Times Square
®
Serin
®
Berwick
®
Fluent
H
C
O
F
F
O
f f
C
H
Hampton
®
Tropic
®
Dazzle
®
H
OFF
Off
Hot
Hot
Cold
MODEL NUMBER:
R111 Pressure Balance Rough Valve Body only
Universal inlets/outlets. LESS trim.
R111SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Universal inlets/outlets. Screwdriver stops. LESS trim.
R110 Pressure Balance Rough Valve Body only
Direct sweat inlets/outlets. LESS trim.
R110SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Direct sweat inlets/outlets. Screwdriver stops. LESS trim.
R115 Pressure Balance Rough Valve Body only
Female thread inlets/outlets. LESS trim.
R115SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Female thread inlets/outlets. Screwdriver stops. LESS trim.
R117 Pressure Balance Rough Valve Body only
PEX inlets/universal outlets for Crimp Ring PEX system
(ASTM F1807) LESS trim.
R117SS Pressure Balance Rough Valve Body only
with Screwdriver stops
PEX inlets/universal outlets for Crimp Ring PEX system
(ASTM F1807) Screwdriver stops. LESS trim.
R118 Pressure Balance Rough Valve Body only
PEX inlets/universal outlets for Cold Expansion PEX system
(ASTM F1960) LESS trim.
R118SS Pressure Balance Rough Valve Body only
with Screwdriver stops
PEX inlets/universal outlets for Cold Expansion PEX system
(ASTM F1960) Screwdriver stops. LESS trim.
R119 Pressure Balance Rough Valve Body only
CPVC inlets/universal outlets. LESS trim.
R119SS Pressure Balance Rough Valve Body only
with Screwdriver stops
CPVC inlets/universal outlets. Screwdriver stops. LESS trim.
See reverse side for dimensional valve drawings.
Revised 1/16

Summary of content (9 pages)