Warranty

© 2018 AS America Inc.
1
Flash
™
Rough Valve Bodies
8/18
MODEL NUMBERS:
❏ RU101 Flash Rough Valve Body with
Flash Connections
½" Universal inlets/outlets.
❏ RU101SS Flash Rough Valve Body with Flash
Connections with Screwdriver Stops
½" Universal inlets/outlets.
❏ RU102 Flash Rough Valve Body with Stub-Out
Connections
½" Stub-out inlets/outlets.
❏ RU102SS Flash Rough Valve Body with Stub-Out
Connections with Screwdriver Stops
½" Stub-out inlets/outlets.
❏ RU107 Flash Rough Valve Body with PEX Crimp
Connections
½" PEX Crimp inlets (ASTM F1807) / Universal outlets.
❏ RU107SS Flash Rough Valve Body with PEX Crimp
Connections with Screwdriver Stops
½" PEX Crimp inlets (ASTM F1807) / Universal outlets.
❏ RU107E Flash Rough Valve Body with PEX Crimp
Elbow Connections
½" PEX Crimp Elbow inlets (ASTM F1807) / Universal outlets.
❏ RU107ESS Flash Rough Valve Body with PEX Crimp El-
bow Connections with Screwdriver Stops
½" PEX Crimp Elbow inlets (ASTM F1807) / Universal outlets.
❏ RU108 Flash Rough Valve Body with PEX Cold
Expansion Connections
½" PEX Cold Expansion inlets (ASTM F1960) / Universal outlets.
❏ RU108SS Flash Rough Valve Body with PEX Cold
Expansion Connections with Screwdriver Stops
½" PEX Cold Expansion inlets (ASTM F1960) / Universal outlets.
❏ RU108E Flash Rough Valve Body with PEX Cold
Expansion Elbow Connections
½" PEX Cold Expansion Elbow inlets (ASTM F1960) /
Universal outlets.
❏ RU108ESS Flash Rough Valve Body with PEX Cold
Expansion Elbow Connections with Screwdriver Stops
½" PEX Cold Expansion Elbow inlets (ASTM F1960) /
Universal outlets.
❏ RU109 Flash Rough Valve Body with CPVC
Connections
½" CPVC inlets / Universal outlets.
❏ RU1098SS Flash Rough Valve Body with CPVC
Connections with Screwdriver Stops
½" CPVC inlets / Universal outlets.
GENERAL DESCRIPTION:
Valve body features cast brass construction with a pre-installed
test cap. Features back-to-back capability. One-half inch
inlets and outlets (choice of Universal, PEX Crimp, PEX
Cold Expansion, CPVC or Stub-outs). Features test cap
with stainless steel retaining ring with ats. Available with
screwdriver stops. Rough-in plaster guard designed as
rough-in guide and for use as thin wall mounting support.
For use with TU series trim kits with cartridges.
PRODUCT FEATURES:
Choice of Connections: Fast and easy installation without
adaptors reducing leak points. Available connections include
Universal (male thread/female sweat), PEX Crimp, PEX Cold
expansion, CPVC, and Stub-outs.
Cast Brass Valve Body: Durable. Ideal material for prolonged
contact with water.
Flat Back: Allows valve to be mounted ush against cross
brace for easy and solid installation.
Test Cap: Allows valve body to be tested and ushed without
the presence of the valve cartridge. Can be tested using test
cap with air (200 psi) or water (300 psi).
Stainless Steel Retaining Ring with Flats: Secures test cap/
cartridge in place and eliminates need for screws. Flats make
it simple to loosen ring for quick, easy insertion/removal of test
cap/cartridge.
Back-to-Back Capability: Hot and cold can be reversed
quickly and easily.
Exclusive Plaster Guard: Plaster guard is designed to protect
valve and act as a guide during installation. It can serve as
mounting support for thin-wall installations.
Wide Rough-in Range: From 1-3/4" to 2-3/4" from finished
wall to the back of the valve.
RU101 SHOWN
SUGGESTED SPECIFICATION
Rough Valve Body shall feature a cast brass body. Shall feature back-to-back capability. Valve Body shall feature test cap to
ush and test the lines. Shall feature stainless steel retaining ring with ats. Rough Valve Body shall be: Rough Valve Body -
American Standard Model # RU10___.