Undercounter Mount Sink Specification Sheet

I31
© 2008 AS America Inc.
6-1/4"
(159mm)
THE GALLERY DOORS SWING TO THE SIDES IN ORDER TO PROVIDE ACCESS TO THE INNER STORAGE.
14" IS REQUIRED TO EITHER SIDE OF THE VANITY FOR MAXIMUM CLEARANCE OF THE GALLERY DOORS.
FINISHED FLOOR FINISHED FLOOR
FINISHED
WALL
LAMINATE
MARBLE
TOP WITH
UNDERMOUNT
SINK
24"
(610mm)
30"
(762mm)
22"
(559mm)
7-1/2" (191mm)
35-1/4"
(895mm)
8"
(203MM)
1-1/4" O.D
WASTE
22"
(559mm)
11.5"
(292mm)




❏ 
• Contemporary style vanity
• Birch veneer construction
• Brushed nickel plated legs
• Available in Espresso

30" x 22" (762 x 559mm)
35-1/4" (895mm) height without top
35-3/4" (908mm) height with marble top

❏
 Laminated marble top custom cut for Studio
undercounter mount sink, pre-drilled
for 8" faucet holes (specify color: Cream - 250, Taupe
- 185)

❏
 Studio vitreous china undercounter sink
Espresso Taupe Cream
Revised 2/08

*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAP ARE SUGGESTED.
▼ ANCHOR SCREWS FOR LAVATORY AND PEDESTAL NOT INCLUDED.
- FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
 Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.9M.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.