Installation Guide

ManualsBrandsAmerican Standard ManualsBathTropic 2-Handle Deck-Mount Roman Tub Faucet in Polished Chrome (Valve Sold Separately)

3/16" DRILLED

HOLE

TROPIC TRIM KIT

DECK MOUNT

TUB SYSTEMS

Installation

Instructions

T038.900

Certiﬁed to comply with ANSI A112.18.1

SPOUT INSTALLATION

U.S. Patent No. D403,750

FINISHED

DECK

REMOVE ALL

BURRS AND

BEVEL

TEMPLATE FOR

SPOUT ROLL

PIN LOCATION

3/16" DIA. HOLE

Drill with 3/16" bit

8.4mm

(21/64")

19.8mm

(23/32")

1"- 2"

FRONT

Complete FINISHED DECK before trim installation.

Turn off the water supplies.

Remove the GUARDS (1) from the VALVE BODIES (2). Remove the

GUARD (3) and 1/4" PLUG (4) from the SPOUT SHANK (5).

The SPOUT SHANK (5) height should be 1" to 2" above the FINISHED

DECK. Cut the SPOUT SHANK (5) if necessary. Remove all burrs

and bevel the end of the shank. Failure to do so may damage

the SPOUT O-ring during installation and cause water leakage.

Drill a 3/16" hole in the ﬁnished deckfor spout locking pin. See

TEMPLATE for location.

18.6mm DIA.

(47/64")

SPOUT SHANK

Flat Blade Screwdriver

Adjustable Wrench

Channel Locks

Phillips Screwdriver

Recommended Tools

M968896 Rev. 1.2

Thank you for selecting American-Standard...

the benchmark of ﬁne quality for over 100 years.

To ensure that your installation proceeds smoothly--

please read these instructions carefully before you begin.

Summary of content (4 pages)

PAGE 1
Installation Instructions DECK MOUNT TUB SYSTEMS T038.900 TROPIC TRIM KIT Thank you for selecting American-Standard... the benchmark of fine quality for over 100 years. Certified to comply with ANSI A112.18.1 To ensure that your installation proceeds smoothly-U.S. Patent No. D403,750 please read these instructions carefully before you begin. M 9 6 8 8 9 6 R ev. 1.
PAGE 2
1A SPOUT INSTALLATION 9 Lubricate the SPOUT ADAPTER O-RING (6) and SPOUT O-RING (7). 6 8 10 7 Push SPOUT ADAPTER (8) on SPOUT SHANK (5) and align slot in SPOUT ADAPTER (8) with 3/16" drilled hole. FINISHED DECK 15 SLOT Tighten SPOUT ADAPTER SET SCREW (9) securely with 4mm HEX KEY (10) supplied. 12 Position the RUBBER RING (14) in the groove in the base of the ESCUTCHEON (11).
PAGE 3
4 TESTING Turn the HOT HANDLE clockwise and the COLD HANDLE counterclockwise to the off position. Unscrew and remove the STREAM STRAIGHTENER. Slowly turn on the water supplies. Operate the HANDLES to flush water lines thoroughly. Check SPOUT connection for leakage. Turn the Handles off. Replace the SPOUT END. STREAM STRAIGHTENER COLD HANDLE HOT HANDLE 5 SERVICE To change the direction of handle rotation 1 Turn off the water supplies 2 Turn HANDLE (1) to the off position.
PAGE 4
TROPIC DECK MOUNT TUB FILLER TRIM KIT MODEL NUMBER T038.