Specification

F27
© 2012 AS America Inc.
SERIN
®
CENTRAL THERMOSTAT
LESS VOLUME CONTROL
MODEL NUMBER:
TRIM KITS:
T064.730 Central Thermostat Trim Kit
Less volume control. LESS Valve.
ROUGH VALVES:
R510 Rough Valve Body only
1/2" NPT inlets/outlets. LESS Trim.
R530 Rough Valve Body only
3/4" NPT inlets/outlets. LESS Trim.
NOTE:
• Requires separate on/off volume control.
• When used as a Bath/Shower:
EITHER
- must use separate on/off volume control for each spray outlet
OR
- a diverter tub spout (requires twin ell)
IS REQUIRED
SUGGESTED SPECIFICATION:
Central Thermostat shall feature a cast brass valve body. Thermostat shall be a wax element shuttle valve. Shall also feature 1/2"
or 3/4" NPT inlets and outlets. Fitting shall be American Standard Model # T430.73x.____ (Trim Kit) and R510 or R530 (Rough Valve).
PRODUCT FEATURES:
Brass Casting: Highest quality faucet material for durability
& long life.
Wax Thermostatic Unit: Permits shuttle valve to move
between the hot and cold seats to maintain the pre-selected
constant water temperature.
Back to Back Capable: Hot and cold can be reversed.
Spring-Loaded Check Valves: When the hot and cold
water enters the fitting, both supplies pass through the
spring-loaded check valves to prevent cross flow of hot and
cold water.
Integrated Stop Valves: Ensure easy cleaning and servicing.
Adjustable Hot Limit Safety Stop: Limits the amount of
hot water allowed to mix with cold. Reduces the risk of
accidental scalding. Maximum water temperature limit may be
reduced to 104 or 109 degrees Fahrenheit.
GENERAL DESCRIPTION:
Cast brass valve body. The single unit contains one
handle, which sets the desired temperature. The
temperature is maintained by a wax element moving a
shuttle valve between hot and cold. Includes Hot Limit
Safety Stop. Maximum temperature limit is 112°F.
Escutcheon plate is stamped brass.
Available with 1/2"
or 3/4" NPT inlets and outlets.
The valve has a high flow
rate, ideal for mutiple outlet installations.
202mm
(7-15/16")
86mm
(3-3/8")
34mm
(1-3/8")
159mm
(6-1/4")
150mm
(5-7/8")
R510
1/2" NPT
R530
3/4" NPT
R510
1/2" NPT
R530
3/4" NPT
25mm
(1")
48mm to 68mm
(2" to 2-5/8")
Revised 2/12