Installation Guide

- 1 -
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2018
Thank you for selecting American Standard...
the benchmark of fine quality for over 140 years.
To ensure that your installation proceeds smoothly-please read
these instructions carefully before you begin.
RECOMMENDED TOOLS
ROUGHING-IN
DIMENSIONS
1
INSTALL SPOUT
Patience
Roman Tub Filler
INSTALLATION
INSTRUCTIONS
T106900
T106901
Certied to comply with ANSI A112.18.1M
CAUTION
Turn off hot and cold water
supplies before begining.
M965948 (8/18)
MOUNTING
SURFACE
8" (203 mm)
14" (349 mm)
6-1/2"
(170 mm)
8 "
(205 mm)
8-1/2"
(216 mm)
6-1/2"
(170 mm)
9"
(229 mm)
1-15/16"
(49 mm)
DIA.
3-13/16"
(97 mm)
2-1/2"
(64 mm)
DIA.
3-7/8"
(98 mm)
1" MAX.
(25 mm)
8" TO 16"
FLEXIBLE INSTALLATION
(203 TO 406 mm)
Adjustable Wrench
Channel Locks
Flat Blade Screwdriver
Phillips Screwdriver
Hex Wench
(supplied)
Hex wench
(supplied)
3
4
6
RECESS
MOUNTING
SURFACE
1
5
2
7
• Apply 4-5 drops of THREADLOCKER (1)
on DIVERTER INSERT (2) threads (supplied).
NOTE: If installing on nished deck, install DIVERTER
INSERT (2) through WASHER (7).
• Thread DIVERTER INSERT (2) carefully until it touches the
installation surface, be sure the RUBBER RING (5)
is properly seated in it’s RECESS at the base of the
SPOUT (3).
• Thread SET SCREW (4) using 5 mm hex wrench supplied.
Make certain SET SCREW (4) is properly aligned and tight
so that SPOUT (3) is locked in place.
• Install PLUG BUTTON (6).