Specification Sheet

ManualsBrandsAmerican Standard ManualsShower ComponentsAmerican Standard Times Square Diverter Valve Trim - Less Valve

F65

TIMES SQUARE

™

IN-WALL DIVERTER VALVES

ALL CONNECTIONS 1/2" NPT

GENERAL DESCRIPTION:

In-Wall Diverters: Rotational control alternates water flow

between two (R420) or three (R430) different shower outlets

(i.e. showerhead, handspray, body side spray or tub spout).

Forged brass valve body. Mixed water inlet and two (R420) or

three (R430) outlets are marked on back of valve body. 1/2"

NPT connections on mixed water inlet and two (R420) or three

(R430) outlets. Stamped brass escutcheon. Tub port with

increased water flow (see chart).

NOTE: Cannot be used as a shut-off valve.

PRODUCT FEATURES:

Solid Brass Construction: Durable, ideal material for

prolonged contact with water.

Removable Plaster Guard: Permits checking of valve

installation prior to installing trim parts.

Choice of Finishes: Wide range of durable finishes.

SUGGESTED SPECIFICATION

Two (three) way diverter shall feature a forged brass body with 1/2" NPT mixed water inlet and outlets. Fitting shall be

American Standard Model # T184.430.___ (Diverter Valve Trim) and R4_0. (Rough Valve Body).

MODEL NUMBER:

TRIM KITS:

T184.430 Diverter Valve Trim

Valve Trim ONLY. LESS Valve.

ROUGH VALVE BODIES:

R420 Two-Way In-Wall Diverter Valve Rough

1/2" NPT inlets/outlets. Less Handle.

R430 Three-Way In-Wall Diverter Valve Rough

1/2" NPT inlets/outlets. Less Handle.

NOTE: Cannot be used as a shut-off valve.

FINISHED

WALL

1-5/8" MIN.

(41mm)

2-5/8" MAX.

(66mm)

2-3/4"

(71mm)

2-1/4" HOLE SIZE

(57mm)

2-3/4"

(70mm)

3-1/4"

(83mm)

Summary of content (2 pages)

PAGE 1
TIMES SQUARE™ IN-WALL DIVERTER VALVES MODEL NUMBER: TRIM KITS: T184.430 Diverter Valve Trim Valve Trim ONLY. LESS Valve. ROUGH VALVE BODIES: R420 Two-Way In-Wall Diverter Valve Rough 1/2" NPT inlets/outlets. Less Handle. R430 Three-Way In-Wall Diverter Valve Rough 1/2" NPT inlets/outlets. Less Handle. NOTE: Cannot be used as a shut-off valve. ALL CONNECTIONS 1/2" NPT FINISHED WALL 2-5/8" MAX. (66mm) 2-3/4" (70mm) 2-3/4" (71mm) 3-1/4" (83mm) 1-5/8" MIN.
PAGE 2
TIMES SQUARE™ IN-WALL DIVERTER VALVES CODES AND STANDARDS GALLONS PER MINUTE FLOW RATE - R420 These products meet or exceed the following codes and standards: ASME A112.18.1 Port A 16 14 12 10 8 6 4 2 0 Tub Port 20 30 40 50 60 70 80 INLET PRESSURE (PSI) GALLONS PER MINUTE FLOW RATE - R430 Port A/B Tub Port 16 14 12 10 8 6 4 2 0 20 30 40 50 60 70 80 ROUGH VALVE BODIES TRIM KITS** INLET PRESSURE (PSI) Finish Options Product Number Description T184.430 Diverter Valve Trim.