Specification Sheet

© 2016 AS America, Inc.
TIMES SQUARE
®
IN-WALL DIVERTER VALVES
SUGGESTED SPECIFICATION
Two (three) way diverter shall feature a forged brass body with 1/2” NPT mixed water inlet and outlets. Fitting shall be
American Standard Model # T184.430.___ (Diverter Valve Trim) and R4___. (Rough Valve Body).
ALL CONNECTIONS 1/2" NPT
FINISHED
WALL
1-3/4" MIN.
(46 mm)
2-3/4" MAX.
(71 mm)
2-1/4" HOLE SIZE
(57 mm)
2-3/4"
(70 mm)
3-1/4"
(83 mm)
MODEL NUMBER:
TRIM KIT:
❏ T184.430 Diverter Valve Trim
Valve trim ONLY. LESS Valve.
ROUGH VALVES BODIES:
❏ R422 Two-Way In-Wall Diverter Valve Rough (Discrete)
1/2” NPT inlets/outlets. 2 Discrete functions. LESS Handle.
❏ R422S Two-Way In-Wall Diverter Valve Rough (Shared)
1/2” NPT inlets/outlets. 2 Discrete/ 1 shared functions. LESS Handle.
❏ R433 Three-Way In-Wall Diverter Valve Rough (Discrete)
1/2” NPT inlets/outlets. 3 Discrete functions. LESS Handle.
❏ R433S Three-Way In-Wall Diverter Valve Rough (Shared)
1/2” NPT inlets/outlets.3 Discrete/ 3 shared functions. LESS Handle.
GENERAL DESCRIPTION:
In-Wall Diverters: Rotational control alternates water ow
between two (R422/R422S) or three (R433/R433S)
different shower outlets (i.e. showerhead, handspray, body
side spray or tub spout). Forged brass valve body. Mixed
water inlet and two (R422/R422S) or three (R433/R433S)
outlets are marked on back of valve body. 1/2" NPT
connections on mixed water inlet and two (R422/R422S) or
three (R433/R433S) outlets. Stamped brass escutcheon.
Tub port with increased water ow (see chart).
NOTE: Cannot be used as a shut-off valve.
PRODUCT FEATURES:
Solid Brass Construction: Durable, ideal material for
prolonged contact with water.
Removable Plaster Guard: Permits checking of valve
installation prior to installing trim parts.
Revised 2/16