Installation Instructions

- 1 -
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2017
Thank you for selecting American Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly-please
read these instructions carefully before you begin.
RECOMMENDED TOOLS
M965848 (8/17)
ROUGHING-IN DIMENSIONS
FLUENT
®
DIVERTER TRIM KIT
INSTALLATION
INSTRUCTIONS
T186.430
Phillips Screwdriver
Certied to comply with ANSI A112.18.1M
Flat Blade Screwdriver
CARE INSTRUCTIONS:
• To keep your new faucet looking new, please follow
these simple care instructions:
DO: – Simply rinse the faucet clean with clear water.
– Dry the faucet with a soft cotton cloth.
DO NOT:
– Do not use any abrasive cleaners, cloths,
or paper towels.
– Do not use any cleaning agents containing
acids, polish abrasives, or harsh cleaners
or soaps.
• Regular and routine cleaning will reduce the need for
heavy cleaning and polishing. If heavy cleaning is
required, the following procedures are recommended:
• Remove as much surface dirt and lm using clear
water and soft cotton cloth (as described above).
– Use any of the following to remove tough surface
lm and build-up:
– Mild liquid detergents
– Clear ammonia free liquid glass cleaners
– Non-acidic, non-abrasive gentle liquid or fully dissolved
powder cleansers mixed according to manufacturers
directions
– Non-abrasive liquid polishers
• Once clean, rinse faucet again with clear water to
thoroughly remove cleaner or polish and blot dry with
a soft cotton cloth.
Failure to follow these care instructions may damage
the Faucet’s finish.
FINISHED
WALL
FINISHED
WALL
41 mm MIN.
(1-5/8" )
66 mm MAX.
(2-5/8")
70 mm
(2-3/4")
57 mm HOLE SIZE
(2-1/4")
ALL CONNECTIONS 1/2" NPT
99 mm
(3-7/8")
49 mm
(1-15/16")
99 mm
(3-7/8")
91 mm
(3-1/2")