Installation Guide

- 3 -
CARE INSTRUCTIONS:
M965952 (8/18)
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH
WITH A COARSE SURFACE.
5
4
2
3
5
6
8
7
1
7
9
4
HANDSHOWER INSTALLATION (FOR MODEL T420901 & T420921 ONLY)
• Drop SPRAY ESCUTCHEON (1) through the fourth hole of the tub ledge (12” max from
SPOUT center) with SPRAY ESCUTCHEON (1) directed towards tub center. Be sure
RUBBER RING (2) is properly seated in ESCUTCHEON (1).
• Add SEAL WASHER (3) and connect HOSE (8) to outlet nipple at the bottom
of TEE (5). Tighten rmly.
• Slip SHOWER HOSE (6) with COUPLING NUT through SPRAY HOLDER (4)
and ESCUTCHEON (1). (Note: SPRAY HOLDER (4) must be separate from
ESCUTCHEON (1) to get HOSE (6) through ESCUTCHEON (1). Install SEAL (7)
before connecting both HOSES (6) and (8). INSTALL second SEAL (9) and
connect HAND SHOWER (9) to SPRAY HOSE (6).
NOTE: When not in use, HAND SHOWER should
be seated in the HOLDER.