Installation Guide

FINISHED WALL

BOTTOM OF TUB

74" FOR HEAD

CLEARANCE

1-9/16" REF.

6-13/16" REF.

12" REF.

18" OPTIONAL

4-13/16 " REF.

1-1/2" REF.

1/2" NPT

1/2" COPPER

9-3/16"

OPTIONAL TO FINISHED

FLOOR USUALLY

BETWEEN 65'' AND 80''

TOP OF TUB RIM

Certiﬁed to comply with ANSI A112.18.1

Recommended Tools

Adjustable Wrench

Channel Locks

Flat Blade Screwdriver

Plumbers' Putty or CaulkingPhillips Screwdriver

ROUGHING-IN DIMENSIONS

Installation for Bath/Shower, Shower only, or

Valve only Trim.

■ Dimensions are for reference.

Thank you for selecting American-Standard...the benchmark

of ﬁne quality for over 100 years.

To ensure that your installation proceeds smoothly--please

read these instructions carefully before you begin.

INSTALLATION

INSTRUCTIONS

T440.502

T440.501

T440.500

QUENTIN™

BATH/SHOWER TRIM KITS

M965236

1-5/8"

3-1/4"

PAGE 1
INSTALLATION INSTRUCTIONS QUENTIN™ T440.502 T440.501 T440.500 BATH/SHOWER TRIM KITS H C FF O Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin. Certified to comply with ANSI A112.18.
PAGE 2
1 INSTALL VALVE TRIM When finished tiling the wall, remove PLASTER GUARD (1) and turn off water supply. 1 Push CAP (2) over VALVE CARTRIDGE (3). Mount ESCUTCHEON (4) to valve body with SCREWS (5). 3 Push DIAL PLATE (6) over CAP (2) and into the four alignment holes in ESCUTCHEON (4). (4) ALIGNMENT HOLES FOR DIAL PLATE 2 4 6 5 2 INSTALL TUB SPOUT, SHOWER HEAD, SHOWER ARM WITH FLANGE CAUTION: Protect finish on SHOWER HEAD and TUB SPOUT when installing.
PAGE 3
ADJUST HOT LIMIT STOP HOT LIMIT SAFETY STOP ADJUSTMENT By restricting handle rotation and limiting the amount of hot water allowed to mix with the cold, the HOT LIMIT SAFETY STOP reduces risk of accidental scalding. To set the maximum hot water temperature of your faucets, all you need to do is adjust the setting on the HOT LIMIT SAFETY STOP. Use a flat blade screwdriver or your fingers to pull up and rotate red HOT LIMIT SAFETY STOP (1). Follow Step "A" or "B" to adjust min./max. discharge temperature.
PAGE 4
QUENTIN™ BATH/SHOWER TRIM KITS MODEL NUMBER 1660198-YYY0A SHOWER ARM AND ESCUTCHEON T440.502 T440.501 T440.