Installation Instructions

- 2 -

•

M965901 (4/18)

HANDLE INSTALLATION

• Install KNOB MOUNT (1) onto VALVE STEM (2).

• Thread HANDLE SCREW (3) into VALVE STEM (2) and tighten.

• Align HANDLE (4, 4a) and push onto KNOB MOUNT (1).

• Tighten SET SCREW (5) in handle with

HEX WRENCH (6) SUPPLIED.

TRIM INSTALLATION

• Place ESCUTCHEON (1) onto ESCUTCHEON HOLDER (2).

• Align ESCUTCHEON (1). Thread ESCUTCHEON HOLDER (2) onto DIRVERTER VALVE (3).

• Tighten until ESCUTCHEON (1) is snug against ished wall.

OPERATING THE VALVE

• Turn water supply on and test installed tting.

• Rotate handle to all diverter positions to check operation of valve.

• Check for leaks.

OFF