Installation Guide

ManualsBrandsAmerican Standard ManualsBathTown Square S 2-Handle Deck-Mount Roman Tub Faucet with Hand Shower in Legacy Bronze

- 1 -

Product names listed herein are trademarks of AS America, Inc.

Thank you for selecting American Standard...

the benchmark of ﬁne quality for over 140 years.

To ensure that your installation proceeds smoothly-please read

these instructions carefully before you begin.

RECOMMENDED TOOLS

ROUGHING-IN DIMENSIONS

INSTALL SPOUT

TOWN SQUARE

DECK-MOUNT BATH FILLER

INSTALLATION

INSTRUCTIONS

T455900

T455901

Certied to comply with ANSI A112.18.1M

CAUTION

Turn off hot and cold water

supplies before begining.

M965903 (4/18)

ROUGHING-IN

DIMENSIONS

8.5"

(225 mm)

9-13/4"

(250 mm)

2-3/4"

(70 mm)

3-1/4"

(83 mm)

24"

(62 mm)

42"

(109 mm)

2-3/4"

(69 mm)

3-3/4"

(96 mm)

21-1/2"

(546 mm)

12" MAX.

(305 mm)

12" MIN.

(305 mm)

1" MAX.

(25 mm)

2-1/16"

(50 mm)

7-13/16"

(199 mm)

Adjustable Wrench

Channel Locks

Flat Blade Screwdriver

Phillips Screwdriver

Hex Wench

(supplied)

Hex wench

(supplied)

RECESS

MOUNTING

SURFACE

• Thread DIVERTER INSERT (5) carefullyit touches the

installation surface, be sure the RUBBER RING (4)

is properly seated in it’s RECESS at the base of the

SPOUT (1).

• Thread SET SCREW (3) using 5 mm hex wrench supplied.

Make certain SET SCREW (3) is properly aligned and tight

so that SPOUT (1) is locked in place.

• Install PLUG BUTTON (2).

Summary of content (4 pages)

PAGE 1
INSTALLATION INSTRUCTIONS TOWN SQUARE® S DECK-MOUNT BATH FILLER T455900 T455901 Thank you for selecting American Standard... the benchmark of fine quality for over 140 years. To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin. Certified to comply with ANSI A112.18.
PAGE 2
VALVE ASSEMBLY • Remove PLASTER GUARDS. • Thread INSERT (1) into SIDE VALVE (2) until it touches the installation surface. • Thread INSERT (3) into SIDE VALVE (4) until it touches the installation surface. • Tighten COUPLING (5) into TEE (6) for products without hand shower. 3 #8 SCREWS 1 VALVE LOCK RING FITTING MOUNTING DECK COLD VALVE LOCK RING 4 SPOUT SHANK 6 FRICTION WASHER MOUNTING NUT 5 HOT 2 3 INSTALL HANDLES • Turn VALVE to OFF position.
PAGE 3
4 HANDSHOWER INSTALLATION (Model T455.901 series only) • Drop SPRAY ESCUTCHEON (1) through the fourth hole of the tub ledge (12" max from SPOUT center) with SPRAY ESCUTCHEON (1) directed towards tub center. Be sure RUBBER RING (2) is properly seated in ESCUTCHEON (1). Install RUBBER WASHER (3) BRASS WASHER (4) and LOCKNUT from underside of ledge. 9 11 • Secure SPRAY ESCUTCHEON (1) by tightening LOCKNUT. • Add SEAL WASHER (5) and connect HOSE (10) to outlet nipple at the bottom of COUPLING (7).
PAGE 4
TOWN SQUARE® S DECK MOUNT TUB FVILLER MODEL NUMBER T455900 / T455901 Replace the “YYY” with appropriate finish code M970468-YYY0A LIFT KNOB (T455.901) M962850-YYY0A BUTTON & SCREW SET M950807-2780A TRANSFER ROD ASSEMBLY (T455.901-278) M970471-YYY0A HANDLE KIT M970472-0070A DECK ADAPTER KIT 002 POLISH NICKEL 013 LEGACY BRONZE 278 BRUSHED NICKEL 295 M910270-0070A STREAM STRAIGHTENER A912629-0070A RUBBER RING M950807-0070A TRANSFER ROD ASSEMBLY (T455.901-002/013/295) POLISHED CHROME FOR T455.