Installation Guide

U.S. Patent No. D403,750

Certiﬁed to comply with ANSI A112.18.1

Installation

Instructions

T480.500 SERIES

1/2" NPT

7" REF.

FINISHED WALL

BOTTOM OF TUB

74" FOR HEAD

CLEARANCE

4" REF.

5-1/8" REF.

OPTIONAL TO FINISHED

FLOOR USUALLY

BETWEEN 65'' AND 78''

TOP OF TUB RIM

1/2" COPPER

1-5/8" TO 3-1/4"

4" REF.

7-5/8" REF.

M968396 Rev. 1.2

ROUGHING-IN DIMENSIONS

To assure proper positioning in relation to wall, note

roughing-in dimensions.

BATH/SHOWER TRIM KIT

Thank you for selecting American-Standard...the benchmark

of ﬁne quality for over 100 years.

To ensure that your installation proceeds smoothly--please

read these instructions carefully before you begin.

PAGE 1
Installation Instructions TM T480.500 SERIES BATH/SHOWER TRIM KIT Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin. Certified to comply with ANSI A112.18.1 U.S. Patent No. D403,750 M968396 R e v. 1 . 2 ROUGHING-IN DIMENSIONS To assure proper positioning in relation to wall, note roughing-in dimensions.
PAGE 2
1 INSTALL TRIM 9 Remove PLASTER GUARD (1). Push CAP (2) on valve, place ESCUTCHEON (3) and attach with SCREWS (4). 8 Install HANDLE (5) by pushing it onto CARTRIDGE STEM (6) and tightening SET SCREW (7) from below. Install SHOWER ARM (8) with FLANGE (9) and SHOWER HEAD (10). Check proper operation of HANDLE (5) and DIVERTER SPOUT (11).
PAGE 3
TM BATH/SHOWER TRIM KIT MODEL NUMBER T480.