Use and Care Guide

B75
© 2013 AS America Inc.
MODEL NUMBER:
TRIM KITS:
T480.502 Seva BATH/SHOWER Trim Kit
Metal Lever Handle. LESS Valve Body.
T480.501 Seva SHOWER ONLY Trim Kit
Metal Lever Handle. LESS Valve Body.
T480.500 Seva VALVE ONLY Trim Kit
Metal Lever Handle. LESS Valve Body.
ROUGH VALVES:
R120 Pressure Balance Rough Valve Body only
Direct sweat inlets/outlets. LESS trim.
R120SS Pressure Balance Rough Valve Body only with
Screwdriver stops
Direct sweat inlets/outlets. Screwdriver stops. LESS trim.
R125 Pressure Balance Rough Valve Body only
Female thread inlets/outlets. LESS trim.
R125SS Pressure Balance Rough Valve Body only with
Screwdriver stops
Female thread inlets/outlets. Screwdriver stops. LESS trim.
R127 Pressure Balance Rough Valve Body only
PEX inlets/Direct sweat outlets. LESS trim.
R127SS Pressure Balance Rough Valve Body only with
Screwdriver stops
PEX inlets/Direct sweat outlets. Screwdriver stops. LESS trim.
PRODUCT FEATURES:
Cast Brass Valve Body: Durable - Quality that will last a
lifetime. Ideal material for prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance. Allows easy control over both water
temperature and volume.
Pressure Balancing Valve Cartridge: Maintains constant
output temperature in response to changes in relative hot
and cold supply pressure. Diaphragm system with integrated
check valves engineered to eliminate cross flow. Avoids
failure due to mineral deposits - ideal for use in hard water.
Back-to-Back Capability: Hot and cold can be reversed
quickly and easily.
Adjustable Hot Limit Safety Stop: Limits the amount of
hot water allowed to mix with cold. Reduces the risk of
accidental scalding.
Exclusive Plaster Guard: Plaster guard is designed to
protect valve during installation and serve as a mounting
plate for thin-wall installations. Two piece design allows valve
to be tested prior to trim installation.
Wide Rough-in Range: From 1-5/8" to 3-1/4".
SUGGESTED SPECIFICATION:
Bath/shower fitting shall feature adjustable showerhead with Max. 2.5gpm/9.5L/min. flow rate. Shall feature a cast brass valve body. Shall
feature ceramic disc valve cartridge which allows user to control both water temperature and volume. Fitting shall be equipped with
pressure balancing cartridge engineered to eliminate cross flow and avoid failure due to mineral deposits. Shall also feature a hot limit
safety stop. Fitting shall be: Rough Valve Body - American Standard Model # R12____, Trim Kit - American Standard Model #
T480.50_.___.
T480.502 Bath/Shower Trim Shown
GENERAL DESCRIPTION:
TRIM KIT
Adjustable showerhead at maximum 2.5gpm/9.5L/min. flow
rate. Metal slip-on diverter spout. Available with metal lever
handle. Brass wall escutcheon.
ROUGH VALVE BODY
Cast brass body, washerless 47mm ceramic disc valve
cartridge with volume and temperature control,
back-to-back capability, integrated check valves, and hot
limit safety stop. Pressure balancing cartridge maintains
constant output temperature in response to changes in
relative hot and cold supply pressure. One-half inch inlets
and outlets (choice of direct sweat, threaded, or PEX).
Available with screwdriver stops. Rough-in plaster guard
designed for use as thin-wall mounting adaptor. Valve body
will accept a variety of decorative Bath/Shower trim kits.
Valve body will accept a variety of decorative
Bath/Shower Trims
Princeton
®
Portsmouth
®
Copeland
™
Colony
®
Soft
Reliant
®
3
Seva
™
Ceramix
®
Moments
®
Green Tea
®
Studio
®
Town Square
®
Quentin
™
C
O
F
F
H
C
H
Revised 10/13
SEVA
™
PRESSURE BALANCE BATH/SHOWER FITTING