Installation Instructions

ManualsBrandsAmerican Standard ManualsBathDelancey One-Handle Shower Only Faucet Trim Kit in Legacy Bronze

- 1 -

Product names listed herein are trademarks of AS America, Inc.

Thank you for selecting American Standard...

the benchmark of ne quality for over 140 years.

RECOMMENDED TOOLS

M985000 (10/18)

ROUGHING-IN DIMENSIONS

Delancey

Pressure Balancing

Bath and Shower Trim Kit

INSTALLATION

INSTRUCTIONS

TU052500

TU052507

TU052508

TU052501

TU052502

Plumbers’ Putty

or Caulking

Adjustable Wrench Channel Locks

Phillips Screwdriver

• To assure proper positioning in relation to wall.

Note roughing-in dimensions.

Teon Tape

Flat Blade Screwdriver

FINISHED WALL

TOP OF TUB RIM

BOTTOM OF TUB

74" (1879 mm)

FOR HEAD

CLEARANCE

3-7/8"

(100 mm)

2" TO 3"

(51 TO 76 mm)

18" (457 mm)

OPTIONAL

(177 mm)

3-1/2"

(90 mm)

(207 mm)

1/2" NPT

1/2" COPPER

FOR SLIP-ON

SPOUT

7-13/16" DIA.

(198 mm)

1-1/2"

4-11/16"

(121 mm)

7-7-16"

(192 mm)

2-3/16"

(56 mm)

9-1/2"

(241 mm)

OPTIONAL TO FINISHED

FLOOR USUALLY

BETWEEN 65" AND 78"

(1651 AND 1981 mm)

7-5/8"

(194 mm)

3-1/4"

(83 mm)

2-3/4" MAX. (69 mm)

1-3/4" MIN. (45 mm)

7-1/4"

(184 mm)

CARTRIDGE INSTALLATION

To ensure that your installation proceeds smoothly-please

read these instructions carefully before you begin.

For use with shower heads rated at 4.9 L/min (1.3 gpm) or higher.

• Remove PLASTER GUARD (6)

(Keep it installed for thin wall Installation).

• Remove BONNET NUT (1) by unthreading it

Counter clockwise. Remove test CAP (2).

• Remove PROTECTIVE HOUSING (3) from

CARTRIDGE (4). Install with “UP” text on top.

• Reinstall BONNET NUT (1) onto VALVE BODY (5)

and hand tighten.

Certied to comply with ANSI A112.18.1M

HOT LINE FOR HELP

For toll-free information and answers to your questions, call:

1 (800) 442-1902

Mon. - Fri. 8:00 a.m. to 8:00 p.m. EST

Saturday 10:00 a.m. to 4:00 p.m. EST

IN CANADA 1-800-387-0369

(TORONTO 1-905-306-1093)

Weekdays 8:00 a.m. to 7:00 p.m. EST

IN MEXICO 01-800-839-1200

Summary of content (3 pages)

PAGE 1
INSTALLATION INSTRUCTIONS TU052500 TU052507 TU052508 TU052501 TU052502 Delancey ® Pressure Balancing Bath and Shower Trim Kit Thank you for selecting American Standard... the benchmark of fine quality for over 140 years. To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin. For use with shower heads rated at 4.9 L/min (1.3 gpm) or higher. Certified to comply with ANSI A112.18.
PAGE 2
STANDARD WALL INSTALLATION • Figure 1. Remove plaster guard from valve. Push CAP (1) over VALVE CARTRIDGE (2) until seated against stop. 1 • Figure 2. Push ESCUTCHEON (3) onto CAP (1) and attach to valve body with LONG SCREWS (4). THIN WALL INSTALLATION • Figure 1a. Push CAP (1) over VALVE CARTRIDGE (2) until seated against stop. 3 • Figure 2a. Push ESCUTCHEON (3) onto CAP (1) and attach to valve body with LONG SCREWS (4). C 4 Figure 2.
PAGE 3
5 ADJUST HOT LIMIT STOP • By restricting HANDLE rotation and limiting the amount of hot water allowed to mix with the cold, the HOT LIMIT SAFETY STOP (1) reduces risk of accidental scalding. To set the maximum hot water temperature of your faucet valve, adjust the setting on the HOT LIMIT SAFETY STOP (1). • Turn CARTRIDGE STEM (2) to the OFF position (coldest setting) before making adjustment to HOT LIMIT STOP (1). Pull forward and rotate counterclockwise one number to limit hot water temperature.