Installation Sheet
- 1 -
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2018
Thank you for selecting American Standard...
the benchmark of fine quality for over 140 years.
RECOMMENDED TOOLS
M965943 (8/18)
ROUGHING-IN DIMENSIONS
Times Square
®
Pressure Balancing
Bath and Shower Trim Kit
INSTALLATION
INSTRUCTIONS
TU18450X Series
Plumbers’ Putty
or Caulking
Adjustable Wrench Channel Locks
Phillips Screwdriver
• To assure proper positioning in relation to wall.
Note roughing-in dimensions.
Teon Tape Flat Blade Screwdriver
H
C
OFF
H
C
OFF
BOTTOM OF
TUB
FINISHED WALL
TOP OF
TUB RIM
8-1/4"
(210 mm)
1-3/4" MIN.
(44 mm)
305 mm
(12")
102 mm
(4")
203 mm SQ.
(8")
65 mm
(2-1/2" Sq.)
4-3/4"
REF.
(121 mm)
4" (102 mm)
74" FOR HEAD
CLEARANCE
(188 cm)
18" OPTIONAL
(457 mm)
1/2" NPT
1/2" NPT
7/8" TO 2"
(22 TO 50 mm)
4-1/2"REF.
(114 mm)
7-1/2" REF.
(191 mm)
65 mm
(2-1/2" Sq.)
OPTIONAL TO FINISHED
FLOOR USUALLY
BETWEEN 65'' (1651 mm)
AND 80'' (1880 mm)
2-3/4" MAX. (69 mm)
1-3/4" MIN. (45 mm)
6-5/8"
(170 mm)
CARTRIDGE INSTALLATION
1
1
2
6
5
3
4
UP
UP
To ensure that your installation proceeds smoothly-please
read these instructions carefully before you begin.
For use with shower heads rated at 4.9 L/min (1.3 gpm) or higher.
• Remove PLASTER GUARD (6)
(Keep it installed for thin wall Installation).
• Remove BONNET NUT (1) by unthreading it
Counter clockwise. Remove test CAP (2).
• Remove PROTECTIVE HOUSING (3) from
CARTRIDGE (4). Install with “UP” text on top.
• Reinstall BONNET NUT (1) onto VALVE BODY (5)
and tighten rmly with 12 Nm or 9 lbs/ft.
NOTE: Specied tightening torque
of BONNET NUT (1) is critical to
assure sealing function.