Installation Guide
- 1 -
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2020
Thank you for selecting American Standard...
the benchmark of ne quality for over 140 years.
RECOMMENDED TOOLS
M965937 Rev. 1.1 (3/20)
ROUGHING-IN DIMENSIONS
Reliant 3
®
Pressure Balancing Bath
and Shower Trim Kit
INSTALLATION
INSTRUCTIONS
TU385500
TU385500WD
TU385501
TU385501XH
TU385501WDXH
TU385502
TU385502WD
TU385502WDXH
Plumbers’ Putty
or Caulking
Adjustable Wrench Channel Locks
Phillips Screwdriver
• To assure proper positioning in relation to wall.
Note roughing-in dimensions.
Teon Tape Flat Blade Screwdriver
CARTRIDGE INSTALLATION
11
1
2
6
5
3
4
UP
UP
H
C
Off
H
C
OFF
18" OPTIONAL
(457 mm)
FINISHED WALL
4"
TOP OF TUB RIM
BOTTOM OF TUB
74" FOR HEAD
CLEARANCE
4-1/4" REF.
(108 mm)
5-1/2" REF.
(140 mm)
1/2" (13 mm) NPT
1/2" COPPER
7-1/2" DIA.
(191 mm)
1-1/2" REF.
(38 mm)
6" REF.
(152 mm)
3/4"" TO 2-3/8"
(19 TO 60 mm)
OPTIONAL TO FINISHED
FLOOR USUALLY
BETWEEN 65'' AND 80''
(1651 and 2032 mm)
2-3/4" MAX. (69 mm)
1-3/4" MIN. (45 mm)
4-1/2"
(115 mm)
To ensure that your installation proceeds
smoothly-please read these instructions
carefully before you begin.
For use with shower heads rated at 4.9 L/min (1.3 gpm) or higher.
• Remove PLASTER GUARD (6)
(Keep it installed for thin wall Installation).
• Remove BONNET NUT (1) by unthreading it
Counter clockwise. Remove test CAP (2).
• Remove PROTECTIVE HOUSING (3) from
CARTRIDGE (4). Install with “UP” text on top.
• Reinstall BONNET NUT (1) onto VALVE BODY (5)
and tighten rmly with 12 Nm or 9 lbs/ft.
NOTE: Specied tightening torque
of BONNET NUT (1) is critical to
assure sealing function.