Technical information

3-2

3.1 MOUNTING PROCEDURES

CAUTION

It is recommended that the eyecup be replaced with the

eyeguard during weapon-mounted use.

NOTE

The ATN NVM-14 is not a weapon sight, however, it can be

used in conjunction with a collimated dot sight or laser aiming

device.

A. MOUNTING THE ATN NVM-14 TO THE WEAPON

To mount the ATN NVM-14 perform the following:

Loosen the clamping knob on the weapon mount. Position the

monocular mount on the weapon’s mounting rail, adjust the

fore/aft position of the monocular as necessary by loosening

the clamping knob and repositioning the weapon mount on

the rail. Tighten by turning the clamping knob (see figure 3-1).

Figure 3-1

Attaching Weapon Mount to Weapon