User Manual

I. Operation
Place the scale on a horizontal  at surface.
1. Press ON/OFF key.
2. Wait until [0.0] is displayed.
3. Put the object(s) on the weighing platform.
4. The scale will show when the weight is stable.
5. Use the C/M (Cal/Mode) key to change weighing units.
II. Tare Weighing.
1. Turn on scale as described above.
2. Place the “tare item” on the platform.
3. Press Z/T (Zero/Tare) and wait until [0.0] is displayed.
4. Add the “net-weight-item”.
4. The scale will show when the weight is stable.