AMW-Scoop Digital Scale 150g x 0.
American Weigh Scales AMW-Scoop User’s Manual 150 x 0.1g Thank you for purchasing the American Weigh AMW-Scoop Scale. Please read all operating instructions carefully before use. This electronic scale is a precision instrument. Weith normal care and proper treatment, it will provide years of reliable service. • Never load the scale with more than the maximum capacity. • Avoid any exposure to extreme heat or cold. Your scale will work better when operated at normal room temperature.
I. Operation Place the scale on a horizontal flat surface. 1. Press ON/OFF key. 2. Wait until [0.0] is displayed. 3. Put the object(s) on the weighing platform. 4. Using the MODE key, you can switch between the weighing units. II. Tare Weighing. 1. Turn on scale as described above. 2. Place the “tare item” on the platform. 3. Press TARE and wait until [0.0] is displayed. 4. Add the “net-weight-item”. III. Calibration 1. Turn on the scale and wait until display shows [0.0] 2.
III. Troubleshooting The primary reason for innaccuracy or malfunction are low batteries, incorrect calibration, overload or operating on an unstable surface. Please keep this in mind and maintain and operate your scale properly. This scale is a precision instrument and must be handled with care. Error Code Descriptions: Error: Nothing on screen, [LO] , Solution: Replace Batteries Error: [EEEE] Solution: Load is in excess of 150g, remove the extra load.
