ZETA User Manual ZT-150 (330lb x 0.2lb) Copyright © 2011 American Weigh Scales, Inc. All rights reserved. Rev. 1.
ZETA Thank you for purchasing the American Weigh ZETA digital bathroom scale. Please read all operating instructions carefully before use. Scales are precision measuring devices and should always be handled with proper care. To ensure years of reliable service, keep these simple tips in mind: • • • • • • • • • • Do not exceed the scale’s maximum capacity. Overloading your scale can permanently damage it! Avoid exposure to extreme heat or cold. Scales perform best at normal room temperature.
I. Part List 1. Scale 2. AAA Batteries (x4) II. Key Description + AAA - + AAA - Bottom of Scale + AAA - + AAA - Unit Key III. Battery Installation 1. Before using the scale for the first time, check the battery compartment and remove any plastic insulation strips or packaging that may be in place to prevent battery drainage during shipping/storage. 2. If you are replacing the batteries, make sure the positive and negative contacts are properly aligned.
ZETA IV. Operation 1. Place the scale on a flat, level surface. Do not weigh on carpet as it may affect the accuracy. 2. Step onto the platform. Once the weight has stabilized, it will be locked on the display. 3. The scale will turn off automatically after 10 seconds of non-use. V. Changing the Unit of Measure 1. Press the UNIT key on the bottom of the scale to change the scale’s displayed unit of measure. 2. If the scale is turned off then back on, it will default to the last unit used.
