Installation Guide

Americana Building Products .

Alpine Patio Cover Installation Guide

STEP 5A - MOUNTING TO WOOD FRAME

Align the holes in awning rail (A) with the holes in

the mounting surface. Attach awning rail (A) using

1/4” x 1-1/2” lag screws (GG) through each hole.

STEP 5B - MOUNTING TO MASONRY

Insert lag screw plug (HH) into each hole in the

mounting surface. Align the holes in awning rail (A)

with the holes in the mounting surface. Attach

awning rail (A) using 1/4” x 1-1/2” lag screws (GG)

into each lag screw plug (HH). The plug will expand

inside the wall when the screw is installed.

NOTE: This may not be suitable for all installations.

Check local building codes. If using masonry

anchors purchased separately, follow the

manufacturer’s guidelines for proper installation.