Operating instructions

Installation instructions
[-47REVERSING THE HARDWARE (CONT.I
4.2 Interchange hinge and screws at top right with screws at
top left of cabinet. Do not tighten screws on hinge side
at tiffs time.
??
I
Installingthe hingeon the left.
7I?
Installingthe hinge onthe right.
NOTES:
Solne hinges have %ur holes. Which holes you use
for installing tile hinge depends on which side you
install the hinge.
• The outer edge of the hinge should be parallel to the
edge of the case for correct installation.
[-5]REVERSING THE DOOR
HANDLES {CONT.!
5.1.4
Remove plug button from tile top hinge hole oil tile left
side of tile door and insert it into tile hole oil tile
opposite side that was vacated by removal of tile top
hinge.
PlugB_
5.1.5 Pull tile plug button from the front of the door and
transfer it to the opposite side.
PlugButton
Toreattachthe
handleonthe
oppositeside.
_-l REVERSING THE DOOR HANDLES
5.1 Transfer fresh food door handle
5.1.1 Rclnove tile handle plug using a tape-tipped
put_ _knife under the edge, and relnove the screw
underneath. Rclnove tile two screws holding tile
f_ handle to the top of the door.
Plug,_
I 5.1.2 Remove the handle. 1
5.2
Transfer door stop
5.2.1 Move the plastic door stop and screws from
the right side to the left side.
DoorStop
RightSide
5.2.2 Move the metal door stop from the right
side to the lel't side and transfer the scrmx to
the opposite side of the doon
LeftSide
Metal DoorStop
5.1.3
Remove the screws from the right edge of the door
top and insert them into the handle screw holes on
the opposite side.
13
5.3
Reinstalling the Fresh Food Door
Handle
5.3.1 Attach tile handle to
the right side of the
door with screws at
the top and under
tile handle plug
5.3.2 Reinstall the
handle plug