9300 SERIES Table Top and Cart Electric Barbecue Grills 9300 9309 9320 9325 9329 Please record your grill’s 10 digit serial number here:______________________________________________ The serial number is located on the black and silver label on the back side of the element control housing. Please also save your proof of purchase for warranty purposes. WA R N I N G • This instruction manual contains important information necessary for the proper assembly and safe use of this appliance.
IMPORTANT SAFEGUARDS W A R N I N G Read all instructions and warning labels prior to use. Failure to follow these safeguards may result in serious personal injury or property loss. This appliance is intended for outdoor household, non-commercial use only. • Never touch hot surfaces. Use cooking tongs, gloves, or cooking mitts since the grill will become very hot. USE HANDLES OR KNOBS. Open hood carefully when cooking to avoid burns from the hot air and steam trapped inside.
Features That Make Your Meco Grill Outstanding A Safe, Simple, Clean and Versatile Alternative Grill for Outdoor Cooking The Americana 9300 Series grills are Safe and Simple to use. There are no ashes to dispose of, no LP tanks to lug to be filled, no bags of charcoal to keep dry or LP tanks to store. It not only gives you steaks seared to perfection, but also cooks chicken to tender, succulent doneness without burning.
BREAK-IN: Place your grill in a well ventilated area. Make sure overhead combustible surfaces are at least four feet above grill. If you have a table model grill, put it on a sturdy surface, away from the edge, and out of the reach of children. Keep the electrical cord out of walkways so it will not be tripped over. Plug the power cord into a 110-120V~ outlet of at least 15A capacity. MAKE SURE NO OTHER HIGH WATTAGE APPLIANCES ARE PLUGGED INTO THE SAME CIRCUIT. Shut the hood of the grill.
THERE ARE THREE WAYS TO COOK ON YOUR ELECTRIC GRILL: (1) The Direct method is for steaks, chops, chicken pieces, and other foods that require SETTING 3 (High) heat and short cooking time. Just put the meat directly on the grid for cooking this way. (2) The Indirect method is for cooking large roasts and poultry that requires SETTING 1 (Low) heat and long cooking times. When using this method, make a drip pan from aluminum foil to fit between the element and the piece of meat.
Care and Maintenance - End of Cooking Session WA R N I N G To reduce risk of serious injury or death from fire or burn hazard: • Allow grill and grease in the Drip Cup to completely cool before emptying, cleaning, moving, or storing grill. • Empty the Drip Cup after each cooking session so grease does not accumulate. To keep your grill operating at its peak performance, move the Handle Control to the element vertical/Rotisserie position after each use.
Meco 9300 Series Electric Grill Models 9300 Basic Table Top Model 9309 Basic Table Top Model PLUS 9300 - Window - Rotisserie Kit (Spit, Forks, Bracket & Motor) 9309 9320 Basic Cart Model 9325 Basic CART Model 9320 PLUS - Two Folding Side Tables 9325 9329 Basic CART Model PLUS - Two Folding Side Tables - Leg Shelf - Window - Rotisserie Kit (Spit, Forks, Bracket & Motor) 9329
Meco 9300 Series Parts List and Illustrations Item Part / Desc. Part # QTY Model 03.5875.02 1 All 9300 series 1 Owner’s Manual 2 Hood / Bowl Assembly _ 1 9300, 9320, 9325 3 Hood / Bowl Assembly _ 1 9309, 9329 4 Bolt #10-24 x 1/2“ 03.0201.02 5 All 9300 series 5 Rotisserie Lock 17.1698.00 1 All 9300 series 6 Acorn Nut #10-24 03.5000.55 1 All 9300 series 7 Lock Nut #10-24 03.0390.00 20 All 9300 series 8 Cooking Grid 03.0710.00 1 All 9300 series 9 Reflector Pan 17.
Meco 9300 Series Parts List and Illustrations 1 2 10 19 11 28 20 29 21 30 13 22 31 5 14 23 32 6 15 24 33 16 25 34 17 26 35 12 3 4 7 8 9 27 18
Preparation for Assembly READ ALL INSTRUCTIONS in the Owner’s Manual before you start. VERIFY PARTS. Remove all parts from the box and arrange on a smooth clean surface. Verify that you have all the parts listed in the below “Parts List”. If you have any questions or need help, contact Customer Service at 1-800-251-7558 or go to www.mecocorp.com. Be sure to have the grill model number listed on the front cover of this Manual.
SHELF & LEG ASSEMBLY (9320 - 9325) WIRE LEG SHELF: (FIG C) Make certain "INDENTS" are to the outside on both Roller (12) and Fixed Legs (13). Attach a Crossbrace (24) to each side of the Legs with #10-24 x 1 1/4" Bolts (14) and #10-24 Lock Nuts (7). Make sure the Star Washer on the Lock Nut is against the Crossbrace. Use eight Bolts and Nuts for assembly; tighten only snug. Fit the ends of the Wire Leg Shelf (25) into the holes on top of each Crossbrace.
WHEEL ASSEMBLY (9320 - 9325 - 9329) (FIG G) Insert an Rivet Axle (18) through the center hole on the recessed side of the Wheel. (The opposite side that is placed against the Leg Tube has a raised cone shaped center.) Insert the end of the Axle, that extends through the Wheel, through the hole in the end of the Roller Leg Tube (12) and fasten in place by inserting the Cotter Pin (20) through the hole in the end of the Axle. (FIG H) NOTE: Wheel assembly will not fit tightly, but will be secure.
HOOD/BOWL ASSEMBLY TO CART (9320 - 9325 - 9329) Rotate the element, using the Control, to the Vertical/Rotisserie position. Set Hood/Bowl assembly over the holes in the Top Frame. (FIG L) 10-24 x ½” Bolts through the Grill Bowl and through the Top Frame. Attach four 10-24 Lock Nuts and tighten securely.
WINDOW ASSEMBLY (9309 - 9329) Open Hood and lay Window Glass (28) into window recess. (FIG O) Insert Carriage Bolt (29) from outside of Hood through hole and install Window Retainer Clip (30) on Bolt. The Long Flange of the Retainer Clip should be against the Window. Put Wing Nut (31) on Bolt, Tighten with fingers until snug. NOTE: DO NOT OVER TIGHTEN Repeat for the other side. Window assembly should look like (FIG P) when complete. CAUTION: This is a heat resistant tempered glass.