Installation Instructions

Americana Building Products .

Sierra Patio Cover Installation Guide

STEP 8A - STANDARD BRACKETS

If you received the standard post mounting bracket

(H), mark the location of the (4) holes in the bracket

at a post location. Using a 3/16” bit, drill holes to

match the pattern on the bracket. Remove dust from

the holes and attach post mounting bracket (H) to

the foundation using (4) 1/4” x 1-3/4” Tapcon

anchors (II).

NOTE: If attaching to wood or composite deck, 1/4”

x 1-1/2” lag screws (GG) must be used. DO NOT

use Tapcon anchors to attach to wood or composite

surface.

Fit a post (C) over post mounting bracket (H). Using

a 1/8” bit, drill (4) pilot holes through the post and

bracket, (2) on each side. Attach the post using (4)

#12 x 1-1/4” screws (BB).

Repeat for all remaining posts (C).

Continue on page 17