Specifications

IMl66-107
System Programming
Line Configuration - continued
Press ITCM ++#746%.
.ine Names
‘ou can name lines as to their function to
dentify them for use. Names such as
VATS, CO, etc., when appearing on the
CD speakerphone displays, make locatin!
t desired line easier for the station user to
lo. A line name can contain up to five
:haracters.
1. Dial 34. “LINE NAME”
2. Select line ports to be named (LED On = Selected).
Line port 1-14 = Dial 01 - 14 or Press Al - Al4
Line port 15, 16 = Dial 15,16 or press Bl, 82
Line port 17-24 = Dial 17 - 24 or press HOLD then press Al - A8.
3. Press # to clear current name.
4. Dial line name character codes (5 characters maximum for each
line port from chart shown below).
- Examples:
- WATS = Dial 91 21 81 73
- 0156 = Dial 00, 01,05, 06
(Each character must be represented by two digits.)
5. Dial +++ and repeat last three steps for next line.
-OR-
Dial +R +K for configuration mode.
To change setting, repeat procedure and make different selection.
I
,
1 PressSPKRtoend.(
w 91
W
94
X 92
X
95
Y 93
V
96
Z
13 Z
16
4-l 8