Specifications

System Programming
IMl66-107
Video Display Terminal Programming Procedure - continued
Menu Descriptions
Main Menu Selections
C.O.S. Programming
1. System C.O.S.
2. Line C.O.S.
3. Station C.O.S.
4. Toll Restriction Table Administration
5. Information
6. Logoff
Enter Selection:
0 Selection 1: Chooses system COS programming.
0 Selection 2: Chooses line COS programming.
0 Selection 3: Chooses station COS programming.
l Selection 4: Chooses toll restriction table
administration programming.
0 Selection 5: Choses an information menu to
provide assistance with VDT programming.
System Cos Menu Selections
System C.O.S. Programming
1. System Defaults
2. System Options
3. System Timing
4. Load / Save C.O.S. Data
5. Serial Communication Parameters
6. C.O.S. Data Printout
7. Set Clock Date /Time
8. SMDA Programming
9. SMDR Print Parameters
10. Logical / Physical Assignments - Stations
11. Logical / Physical Assignments - Lines
12. Automatic Station Relocation
13. Feature Inhibit Programming
14. Enable All Inhibited Features
15. LCD Messages
16. ‘Software Version Number
17. Return To Previous Menu
Enter Selection
l Selection 1: System defaults
l Default All System Data
l Default All Line Data
o Default All Station Data
l Default Selected Station Data
l Pulse Dial on All Lines
l Tone Dial on All Lines
l Default Button Mapping on all Stations
l Master Clear System Data
l Default Toll Restriction Tables
On each default selection, the system questions the
user as to whether the default should be made.
If
response to the question is yes (Y), the default is
performed.
When defaulting selected station data, the station to
be defaulted must be identified by port number (10 -
57)
l Selection 2: System Options
l Voice/Tone Announce First on Intercom
(Choose either Voice or Tone signalling as
standard intercom signalling method.)
l Station Message Desk (Assign or clear one
station port as the central message desk.)
l Assign Extension Number to Port (Gives a
station flexible extension numbers from 2 - 4
digits.)
l Assign Pilot Number to Department (Gives an
entire department one extension number.)
l Music on Hold
l Do Not Disturb Inhibit
l Station Monitoring (Visual ring indication for
station with BLF appearance at programmed
station can be enabled or disabled.)
l Tandem Attendent (One or both attendants can
receive timed hold recall and recall from
transfer.)
l Voice Mail Auto Transfer (Enables immediate
line transfer when voice mail unit is included with
system.)
l Disable Stations (Disable station ports)
l System Alarm Reporting
l PA Options (Enables direct ringing, delayed
ringing, or night transfer (of ringing) and zone
paging on the PA port. Also chooses ringing
port relay control as either paging port or station
port 17.
The station to be programmed must be identified by
port number (10 - 57).
When assigning extension numbers, enter station port
or department number then make extension number
entry.
4-82