Specifications

IMl66-107
Maintenance
Chapter 6
Maintenance
:
Technical Assistance
Technical Assistance
Should you experience difficulty with installation,
checkout, or programming, and have made an attempt
to isolate the problem using information provided
herein; or should you encounter problems at a later
date which cannot be resolved by referring to this
manual, call the Comdial Technical Service staff.
They can be reached at 1-800-388-8224 between the
hours of 8:00 AM and 8:00 PM Eastern time, Monday
through Friday.
When calling for technical assistance, you should be
at the job site and you should have in your
possession, as a minimum, an accurate volt-ohm
meter and a copy of this manual.
Repair Service
If your common equipment cabinet or an individual
station needs repair, it may be returned to Comdial.
Comdial will, at their option, either repair the defective
equipment or replace it with a remanufactured unit.
This repair will be done for a fixed charge. For
information on this charge, please call or write to the
address given below.
Comdial
P.O. Box 7266
Charlottesville, VA 22906
Attention: Repair Department
Telephone: [phone]
I-800-877-4448
And Repair Service
When returning equipment for repair, pack it carefully
to prevent damage. Any damages during shipment
will be the responsibility of the purchaser. The
equipment should be shipped freight or postage
prepaid. The shipping address is:
Comdial
1180 Seminole Trail
Charlottesville, VA 22901
Attention: Repair Department
Fuse Location
The system is protected against short circuit damage
by a slow-blow fuse located on the right side of the
common equipment cabinet. Always replace the fuse
with one of the same value and type, othennrise,
equipment damage could result.
l 4-Line, a-Station Base Unit - lA, 250V Slow-Blow
l a-Line, 1SStation Base Unit - 3A, 250V Slow-Blow
l lSLine, 32Station Base Unit - 3A, 250V Slow-Blow
Wiring
Refer to Chapter 3 section titled Checkout and Failure
/so/&ion for instructions for testing the system wiring
and components for possible failure.